Some digital comparisons: cables,transports&jitter


A friend and I spent a couple afternoons comparing various digital cables, transports and jitter/resolution enhancement boxes in my Tact/Talon system.

Cables on hand: HMS Il Primo II, Argent Jaden, Verastarr Silver, PS Audio XStream, Illuminati DX-50, Cardas AES, Legend Chinchilla XLR, Green Hornet, and 2 homemade AES/EBU.

Transports included: Micromega T-Drive, Modwright Sony 7700, Tascam RW2000, Modded Marantz, and 2 Toshibas and a Panasonic DVD player.

Jitter boxes were the Camelot Dragon Pro2 Mk 2 and the Assemblage D2D w/& w/o upsampling (the Tact upsamples if the boxes don't). As you can see the variables were pretty extensive, but it was fun and enlightening, and here are some of my impressions:

First, anyone who doesn't believe/hear differences between different digital cables/transports please start your own thread. Differences were clearly obvious to us, even to the person sitting behind the speakers switching the cables/settings (my system uses no analog interconnects).

Surprisingly, I found the differences between type of cable generally more pronounced than the make of cable. Also surprising (to me) was that the coax generally sounded fuller, richer, more laid back and deeper in staging (with the possible exception of the Legend) than the AES/EBU.
The AES provided more immediacy, more presence and impact, and a wider more detailed stage. This was as true INTO the jitter box as after it.

Also surprising was that the degree of change with cables was as pronounced before the jitter box as after (though the box was a nice improvement--blacker background and better bass). My favorite cables were the Chinchilla (which is actually an analog XLR) and the HMS. The Chinchilla is open, rich and natural sounding with no loss of detail. The HMS is also quite rich with better dynamics and drive than the other coaxes.

Regarding the dejitterers, they were slightly different, but more alike than different when just dejittering. I generally preferred the upsampling done in the Tact when using the D2D; with the Camelot I liked using the 20 bit mode when using a Coax into it--more dynamic; otherwise liked the Tact doing all the upsampling (BTW, I always prefer the signal upsampled in the Tact to 24/192 when using the Tact 2.2x with the 2150 amp).

For transports, I didn't find the Toshibas and especially the Panny in the same league as the Micromega or Sony (or the Tascam either). With all the talk about the Toshibas I was disappointed. The 4960 was closer than the 3960 though. And my friend is hoping that some mods will improve them (we'll try again after they're done).

I liked the Sony better when not using the jitter boxes, but with them I preferred the Micromega (smoother and more dimensional, but also somewhat lacking in the bass).

Well that's about it...more general impressions than a real shootout. But, again, the differences were clearly obvious in most cases. Surprised that so many don't hear them. Maybe it's all system dependent ;-))
richards

Showing 2 responses by kana813

Richards-

"Maybe it's all system dependent ;-))>" Yes, it is, and digital cables do make a difference,as do transports, but if your Tact RCS is running on the stock SMPS and stock input transformers it will be more sensitive to jitter.

IMO- Once the TacT is running on clean power and low jitter input/output transformers, AES/EBU digital cables sound better than SPDIF RCA. The best cable I've heard is the Audience Au24.

Two other jitter boxes to try are the Genesis Digital Lens and the Apogee Big Ben.
Dmitrydr- I don't think the differences in cables, Richards heard were cause by jitter. It may have influenced
the sound he heard with the transports and jitter boxes.

Just my opinion, but I think differences in cables due to materials, construction techniques,and impedance mismatches at inputs/outputs can inducing a time-smearing artifact on the digital pulses. The cable's construction can also effect the transmission of noise from one component to another, which can influence the performance of the digital input receiver in the DAC.