Sharing a subwoofer between a Stereo and HT combination.


Looking to improve my Stereo playback in a limited space apartment.

Presently have a Denon AVR X3700H and I use it for Stereo in Pure Direct Mode for Stereo, and in a 5.1 configuration for HT.

Would like to improve the Stereo playback, and considering options.

1. Add a better stereo amplifier for just the Front L/R speakers.

2. Add a better Integrated with HT bypass for Stereo to the existing.

3. Add a Preamplifier with HT bypass and a Stereo amplifier to the existing.

Option 1 is obviously the simplest, and is the easiest starting point. Would use the existing pre of the AVR, and the bass management of the AVR and sub. Disadvantages are that the Pre is not the best and sub integration with the FRONT L/R with the separate amp likely not balanced at all volume levels in both stereo and HT modes.

Options 2 and 3 can provide better Stereo, but I am having trouble sorting out how the subwoofer integration will work for the Home Theater configuration.

Has anyone worked thru this and have any suggestions for subwoofer integration? Best Stereo integration, and reasonable HT integration at various volume levels. 60db to 80db average.

At the moment I am favoring Rouge Audio and Hegel as the component items for the Stereo system, either as integrated or separates. Would also consider Parasound and Anthem.  The Hegel integrated would require an additional unity gain pre to provide all the inputs I would ultimately like to accommodate.

Heard the Hegel H390 at my local dealer, and was blown away by the sound. Not sure I can afford to go that route, but am considering the Hegel H190 with the hope of the same sound. Adding a unity gain pre to get more inputs is a complication. As a result would consider the Hegel P20 and H20 to get the Hegel sound with separates.

Could not hear the Rogue Audio components in a similar configuration in the same room, but considering the Rogue Audio Pharaoh as an integrated, or the RP-1 and Hydra as separates. Maybe all the way to the RP-5 and Dragon as separates. Heard the Rogue Audio Sphinx V3 versus the Hegel H95, and liked the Rogue better with the same speakers (Revel Concerta2 M16). Also heard the Rogue Pharaoh with a Rogue pre, but a different configuration, speakers, and room, with different input, but liked the sound.

Have not heard comparable Parasound or Anthem configurations. Have an Anthem AVX 510 that was replace by the Denon when it went in for a repair. Like it’s sound, and used it as a test of the pre outs from the Denon into the Anthem for stereo, and that led to more exploration. I know, no amplifier ins on the Anthem, so not a sustainable configuration, but gave me ideas. The Anthem is outdated for video, so haven’t put it back in the main system. Looked at the Anthem STR integrated, but the HT bypass also shuts off the subwoofer integration. That is largely what led me to the issue of subwoofer integration with a multi use set up.

As I understand at the moment, it would seem that the best integration of the subwoofer would be to connect the subwoofer to line level outputs of the stereo system, and optimize the subwoofer there. Set the HT as a 5.0 and make sure the fronts are set as full range to use the Stereo as the front L/R with HT bypass.

Any hints or tips welcome. Note: I do not have the space for 2 separate listening environments, and do not foresee that in my remaining lifetime. If you look at some of what I have listed here, the price range goes from $2k up to $8-10K, so consider that a range. Tube pre OK, but not sure I am ready for all tube amp. Present speakers not optimal for tube. May update speakers, but will likely still be bookshelf’s as the space and room layout cause more issues with full range floor standers. Only path I would see to tube amps would be to go to single driver full range speakers.

budjoe

I kind of live in the same world as you do. Started with a Marantz sr5015, added a MM7025 amplifier for the left and right to improve SQ. That was a good move until I got a INNUOS pulse mini. That was a nice upgrade from the HEOS streaming app on the Marantz. Wanting to take the stereo game up a little more I started looking at pre-amplifiers with home theater pass-through and subwoofer integration. The best solution that I could find on the market currently is the Anthem STR pre-amplifier and power amplifier. Currently awaiting its arrival will report back after a few hours of playback. Good luck in your search

I’m in the same boat as you, and right now I’m running an integrated amp with ht bypass 2 ch and ht/w sub config. I’ve tried line level for the sub on the integrated, but then the ht wasn’t right. So when I wanna run the sub, I’ll listen through the ht bypass, otherwise I run 2 channel without sub. It’s a little sacrifice yes, but  not much where I’m gonna go buy 2 separate subs to add for 2 channel.

I added the same external amplifier that @gkelly did and got favorable results using my Yamaha RX-A2080 AVR. I have since upgraded to the Yamaha RX-A6A AVR (just deployed yesterday) and so far the same favorable results.

Even though the Marantz specs out the same as the AVR it is dedicated 2-channel power and not sharing things with the AVR innards. I disagree with those that feel the pre in a well-made AVR is terrible. Mine has been quite engaging.

My dual subs are driven from the pre out on the AVR and I listen in straight mode when doing 2-channel stereo so that he subs stay engaged (on a Yamaha in Pure Direct mode it turns off the sub channels). The room correction in the Yamaha also helps figure out the room and blends the subs and the speakers for both HT and 2-channel.  I would try this way first and determine what you think. I was able to get the Marantz used at half of the list price.

My advice is to audition a Marantz processor and external amps.

I haven't gotten to listen to all Japanese HT brands but I've heard some that really sounded thin by comparison to Marantz or high end processor brands.  Marantz is the cheapest I know of that consistently sounds good. 

Mind you, I have a Luxman (Japanese) integrated and it sounds great.  There's something about certain inexpensive HT processor brands that just don't sound that full.  Oppo BD players however sounded excellent. 

 

 

 

My 3.1 mixed setup has been rock solid for the past three years.

- Denon 4700x running in pre-amp mode

- 3 channel power amp (ATI 523NC)

- Parasound P6 for front channels on the bypass input. Sub out from Denon to the Sub Bypass input. Sub Bypass is a great feature, it operates the same as the L/R bypass with sub output and crossover/level management controlled by the P6 for stereo inputs and by the AVR for HT play via bypass input. One note on the P6, the internal DAC isn’t great and I experienced great improvement inserting a separate DAC.

All components are in a console and controlled by universal remote. I only need to get up to change the CD.

Running a separate Pre was critical for my use case, because I like to watch sports on mute and play the stereo at the same time.