2. member-reviews
  3. 1119568231

Review: Project 1 Xpression Turntable

Category: Analog

Having been in this hobby since 1957,and once a dealer,have seen a lot of product good,bad and indifferent in 47 years of doing this. In this period of time, in my opinion there are only about fifty products that have stood the test of time and offer to this day extraordinary value in the price/performance category. Certainly Dual,Thorens and Miracord owned that category outright for many years,although some of their products left a lot to be desired. But nonetheless these products established the price/performance category and to this day some of these products from Dual,Thorens,and Miracord command some very high prices in the vintage market place, with some selling for more now, than when they were new. Now thats value.

Enter now the Project 1 Xpression turntable with the Project Carbon Fiber tone arm. Here is a turntable I believe in the years to come will establish itself as one of those hallmark audio items to withstand the test of time. It has already served noticed to the industry,that the bar of performance has been raised considerably and that to compete in this price/perfomance arena, there is little to compete with the Project 1Xpression. At this point in time it clearly outpaces the contenders in the similiar products listed and at $449.00 retail it is a no brainer to pick the Project 1Xpression.

The Project 1 Xpression is a fully contemporary turntable of the time,aware of the errors of the past and firmly placed in the present and future.

The construction and build quality is exemplary at this price range. Plus the Carbon Fiber tone arm, clearly puts the table at the head of the list. Although the supplied Sumiko Oyster Phono Cartridge, is no where near what this table demands. This table just begs for a higher end cartridge and if one should acquire this table, consider the supplied cartridge nothing more than an emergency back up. I feel that a Denon DL 110 would be ideal for this table.

Although in it's matt grey finish and its overall cosmetic,some may deem it a somewhat pedestrian and austere in the overall cosmetics of this table. But rest assured the project 1Xpression is a world class performer, by any standard.

Specs Below:

Pro-Ject 1 Xpression Turntable

Manual Turntable with a Carbon Fiber Tonearm & Pre-Mounted Sumiko Oyster Phono Cartridge

Pro-Ject 1 Xpression Turntable Features:

Cast aluminium platter with felt mat

Low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing housing

Motor decoupled to reduce vibration

Available in matt grey

Dust cover included

Pro-Ject 9c Carbon Fiber Tonearm Features:

9" precision tonearm with carbon-fiber armtube

Conical carbon-fiber armtube avoids standing wave reflections

Inverted bearing design with four hardened ABEC7 spec ballraces

Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle)

Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell

Highly flexible top-grade copper internal wiring.

Conical carbon fiber armtube allows adjustment of needle azimuth despite fixed headshell

Vertical tracing angle adjustable

Tonearm bearing comprises inverted hardened stainless-steel points and sapphire thrust-pads

Pro-Ject 1 Xpression Technical Data:

Dust cover yes

Supplied counterweight cartridge weight 4 - 6g

Optional counterweight cartridge weight 6 - 9g

Nominal speeds 33,33/45,11 r.p.m.

Speed variance ±0,5 %

Wow and flutter ±0,1 %

Signal to noise -70dB

Down force range 1 to 3 Grams

Effective tonearm length 8.6 " (218,5mm)

Effective tonearm mass 8.7g

Overhang 18.5mm

Platter weight/diameter 2,2kg/300mm

Dimensions (lid open) 370 x 415 x 400mm

Dimensions (lid closed) 118 x 415 x 320mm

Weight with lid 6,3kg

Mains power supply : 100 - 110V, 60 cycles

Power consumption 2W

So if looking in the Rega P2,P3 or Music Hall MMF 5 or MMF 7, or Goldring GR1, here is a solid alternative at a very nice price and in my opinion clearly and without question is sonicaly superior to these tables. This is not meant to disparage the Regas,Music Hall or Goldring. They are very fine tables and worthy of anyones intention in new turntables on the market today.

However it is my opinion that the Project 1Xpression is a cut above and when it comes to price, there is little to consider.

One can do a lot worse than not choosing the Project 1Xpression and It would be a pity, though, if all the $1,000.00 turntables that are better built but don't sound nearly as a good outlived it to pollute the ears of our children.

Associated gear
Click to view my Virtual System

Similar products
Rega P2,P3, Music Hall MMF 5, MMF 7,Dual CS 455,CS 435. Goldring GR 1, Thorens TD 158
ferrari

Showing 1 response by ekobesky

ekobesky
259 posts
 
I can't help but feel this is a cheap table dressed up with a nice arm. And, nice as the arm is, the Rega RB250 and RB300 are now and will remain the gold standards in budget tonearms probably for the rest of our lives. In 2005, a hangy-downy weight on fishing line just seems like cutting corners, not to mention a headshell that's fused on, and not integral like the Regas.

Which brings me back to the Rega tables -- they look better built because they are. Even the dustover is thicker and more durable. But most importantly, they have an all-of-a-piece design with synergy as the goal. If the Xpression works, I feel it does so by accident. Also, my experience with the Czech built Music Halls (made in the same factory, I believe) was downright rotten.

So, if the Xpression does in fact have an edge in sound quality, it's at the expense of long-term reliability and pride of ownership. I'm listening to a 25-year-old Rega Planar 3 right now and it looks and sounds as good as ever -- second only, at the time, to the LP12 (though obviously the state of the art has advanced considerably since). I don't know if any of the Pro-Ject designs will have that kind of longevity. Time will tell.

Finally, there is no upgrade path with the Xpression. With the Regas, you can upgrade the counterweight, try an acrylic platter or take advantage of any number of aftermarket tweaks. I think it says something that the aftermarket ignores Music Hall and Pro-Ject designs. And also that parts and upgrades from the manufacturers are scarce. If I were an owner, I'd be concerned that I was sold a "throwaway" built like a $200 DVD player and meant to be tossed out as soon as it malfunctioned.

I can agree on the Denon DL-110 cartridge -- unquestionably one of the finest HO moving coils made and, along with the DL-160, one of the best values as well.

But for me, Rega stands apart because even their cheapest tables can be a lifetime investment that will be supported by the factory for as long as you own them.

All that said, the more the merrier. Competition only serves to make everyone's products better, and despite my concerns about its build quality and long-term "ownability," the XPression does indeed seem to offer some serious competition.
More to discover