Power cable for REL sub -- modestly priced


Does anyone have a suggestion for a longer cord for a REL 328 sub? It has a class D amp.
Before you suggest high dollar cords, please know that I'm not a skeptic, but am tapped out for power cords. And, for what it's worth, I had a Pangea AC9 1 meter power cord which I experimented with using my REL. Made zero difference. In fact, in an exchange with REL, they said this: "A while back, REL tested some third party power cords with our subs but did not find a noticeable impact."

So, my question is about a decently made but not pricey brand of extension cord for a REL sub. I'm not looking for Shunyata etc.  Any suggestions? Thanks.
128x128hilde45

Showing 11 responses by hilde45

@lalitk No reason I didn't mention. Stock power cord is fine, but it's too short. Thanks for the suggestions.
@tvad Longer means, say, 12 feet? I need some room to move it around in a space with limited electrical outlets. Even 10 feet would be ok.
@tvad Thanks. The cord that comes with the REL is a Volex 1625 cord: Wire Gauge = 10, rated current =10A.
However, the Newark cord is rated 14 gauge and rate for 15A.
Not sure if a thinner cord would make a difference for the REL.

@jl35 "Used 2 foot cord" sounds like a country song. ;-)
@millercarbon Do you think it would make a difference to a sub to go from the mfr supplied cord which is 10 gauge to a 14 gauge cord? If not, then this is going to be one inexpensive shopping experience (for once).
@tvad Thanks. I don't expect to hear a difference. Just want to make sure it will work with the sub, mechanically. (That's probably a super dumb question, but if I clear it out of the way, I'm good to go.)
Thanks, all.

Unlike many purchases, I’m trying not to overthink this one.

Well first of all if you have one try it and see. I doubt you will notice any difference.
I agree, which is why (a) I’m not especially interested in doing comparisons and why (b) I only want to know what will work, mechanically.

It’s because I *don’t* have one that I’m asking the question.

As a P.S. I don't want to overspend because I'm convinced that multiple subs is the direction I'll go, and I may sell this sub and get two others that match. So this is just about the *now*.


@wlutke
@turnbowm
If I need a reality check, I’m happy to have one — because it makes this an easy purchase.

But look at the Volex page:
https://www.volex.com/products/detail/v1625

It says:
Wire Gauge 10
Rated Current 7A, 10A, 12A, 13A, 15A
What could "Wire Gauge 10" mean except "wire gauge 10 AWG"?
Thanks, all. Here's the response from REL to my question, FYI:

REL: "Thank you for contacting us. You can use an extension cord with your REL subwoofer, though it is important that the extension cord is rated to handle the current draws requires by the subwoofer. The extension cord should at least match the specifications of the stock power cord that is provided with the subwoofer, and these specs are listed below:
- 3 conductor (including earth ground)
- 18 AWG wire
- 300V voltage rating
- 105°C temperature rating."

@a_shah -- your post's style seems inspired by Gertrude Stein. Viz., "We are able to notice that each one in a way carried a bundle, they were not a trouble to them nor were they all bundles as some of them were chickens some of them pheasants some of them sheep and some of them bundles, they were not a trouble to them and then indeed we learned that it was the principal recreation and they were so arranged that they were not given away, and to-day they were given away."
@ptrck If mine wasn’t class D, I’d probably be much more inclined to buy cords -- as I have with other gear.

FWIW, nice new video on how to make a cable by Tarun A British Audiophile: www.youtube.com/watch?v=gfVYfC6tmcc