Please tutor me on some integrated amp basics.


I’ve recently purchased Magico A3 speakers and a VPI Classic 2 SE turntable with an Ortofon Black 2M moving magnet cartridge. I have a Marantz SA 8005 CD/SACD player to play the few (maybe a hundred or so) CD’s in my possession.
I’ve mostly vinyl albums and no streaming sources. I’m next going to upgrade my old amp/preamp purchased back in the late 70’s with a new, probably integrated, one and am starting to do some research.

Here’s where I need some tutoring. A lot has changed since the seventies with the advent of digital technology. As well as I need to learn more about amplification components in the high end of audio technology. I keep running across terms I don’t understand. I’ll give you a list and if someone would be kind enough to explain these basics I’d be obliged.

For instance I was reading about the Hegel H360 integrated amp that Magico’s Alon Wolf recommended for their A3’s. The review mentioned they were a Class A/B amp, another person commented Class A’s were better, and a third person said he didn’t care for Class D amps. What do these classes signify? 

A second question is about DACs. I generally understand their purpose of the DAC, converting a digital to an analog signal. However my only digital device, the Marantz SA 8005 already has a DAC, ostensibly of good quality. The turntable ’s Ortofon cartridge would not need to play through a DAC, I presume. Would I bypass the CD’s players DAC if I purchase the higher quality Hegel H360 integrated amp?. Or could I find an equivalent integrated amp without an integral DAC?

On the other side of the equation I understand the turntable’s cartridge cannot play through the Hegel without first going through a phono stage. My old Phase Linear 4000 preamp you just plugged the turntables RCA cables into the back of the preamp and you were done. What’s that about? Do they make equivalent integrated amps to the Hegel H360 with integrated phono stages already in place, so I can just plug my turntable in as I’ve been able to do before. The amps don’t seem to be well integrated at all if you have to add a pricey phono stage to make them work, and end up having an extra DAC. That’s just me whining.

Third question is what are monoblocks, how are they used, and what are their advantages to a system? They were used at one of my speaker auditions.

I figured out the answer to what amplifier damping was myself, so I’m sparing you that one, but what does the term impedance mean? I keep coming across that.

Thank goodness I don’t have to figure out the cabling nightmare yet. Thanks for any help.

Mike
skyscraper
Duckworp, my apologies, but somehow when re-reading this thread this morning, I noticed, and think I missed replying to your long and thoughtful post.

I will be setting up my new system first with some more basic cable as you suggest. Your outline of how to proceed seems quite sensible to me. I will be concentrating on speaker cable first as you also suggest. The only exception will be acquiring the relatively inexpensive VPI manufactured turntable interconnect as my turntable is a VPI Classic similarly wired. I’ll look into the Townsend brand you recommend as well.

I appreciate you thinking and saying the Luxman will match well with the Magico’s. I surely hope so. The Luxman rep that told me they use Magico A3’s to demo their amps at shows encouraged me to think they may be well matched too.

Austinbob, sorry, I think I missed replying to your post too, which followed directly after Duckworp’s. I wish I had that room correction program you have with your Lyngdorf, especially if it works as well as the reviewers say. I seriously considered the Lyngdorf and a couple others for that alone.

Mike
Twoleftears. I've added Wireworld  and Audio Sensibility to my long list. 

Ieales, thanks for pointing out a few touted, but questionable cable construction attributes. Helps sort out the wheat from the chaff.

Mike. 
skyscraper,

You might have noticed that, when it comes to cables, there are two large groups.

One considers cables as a Heaven's answer to, more or less, everything although, once you read their reports, they are really using them as tone controls. It may not be that bad of an idea for those who do not own your amplifier. Your set-up is simpler to manage, though.

Second group does not believe in absolutely anything that has anything to do with cables. They barely accept that cables transmit signal, it seems, and stop short of claiming that wire hangers are just fine.

These two groups are two parallel worlds that, on occasions, throw all the verbal ammunition they have at each other. Not much to learn there. You will read some of the statements in disbelief.

You seem to be the kind that will end up in the third, probably the smallest, group which believes there may be something to cables but does not believe they are all that matters and leaves mind open that either group may actually have some point. We will see where you settle.

I am in that third group, probably because I do not have particular enjoyment constantly chasing some sound, etc. My balanced (XLR)interconnects are Shunyata Venom. They are the cheapest that Shunyata makes. The main reason for choosing them was that they look like they mean business while being the least expensive out there. They replaced some much cheaper ($15-20) cables. I have had them for months so, if the burn-in actually exists, it should be settled. The difference in sound is about none. If Spanish Inquisition knocked on my door and I really had to pick one, I would probably have to admit that cheaper ones are slightly better. Someone might say that it depends on matching, but someone else may say it is not the case.

My speaker cables are Monster from 1994 ($30 for more length than I have ever needed). I have never directly compared them to anything else so I cannot comment much. Still, they must be transmitting the signal as I have noticed differences when changing any other component. I am following these threads to get some idea and google whatever people mention until I get to some cable that fulfills my criteria (pleasing to the eye, available in the length I need, and works/transmits signal). No luck so far although Zavfino cables came close. They even say they offer different lengths but it is not that clear how to order it.

It may not matter to you, but it is worth mentioning that some of the more expensive cables are not that flexible. It may become a bit of a practical issue, in case you have some angles or tighter places to navigate them through. Luckily, many seem to be so thin that I wonder where the wire actually is.
skyscraper,

You bought Magicos because you liked their sound there. Why don't you ask what cables they used during your demo? If cables actually do make a difference, those are the cables you want. If they are within your price range, it is the end of the cable road for you and you can consider yourself lucky.