Peachtree GaN 400 vs Class D Audio Mini GAN 5


This was originally posted in the https://forum.audiogon.com/discussions/lsa-voyager-gan-amplifier thread but I thought it might be easier for people interested in these two amps to find as a separate thread.

I have formed some preliminary thoughts on the Peachtree GaN 400 vs. the Class D Audio Mini GAN 5. I have both amps hooked up to the RCA outputs of my Schiit Freya Preamp using its solid state stage and either the SMSL SU-9 or Denefrips Ares II DAC running Roon/Qobuz. The output of the amps is hooked up to an A/B switch with is connected to my Tekton Moabs. Cables are identical for each amp. The GaN 400 has about 40 hours of burn in and the GAN 5 has about 11 hours of burn in. Before I got the GAN 5 I was comparing the GaN 400 to my DIY First Watt M2x which has become my favorite amp compared to other First Watt amps as well as the PS Audio M700's and Willsenton R8.

The Peachtree GaN 400 is a great amp. It has a level of detail, spaciousness, clarity, and tonal purity that I haven't heard before in my system. The soundstage isn't wider than the M2x but it is airy and more spacious and quite a bit more holographic. The music sounds like it has been unpacked and a veil lifted. It also has great dynamics. Bass is tight and fast and the highs are detailed and crisp without being edgy or fatiguing. Male and female vocals are very clear and natural. But, the amp doesn't have that liquid, wet tubey sound. I have never owned a 300B amp but my guess is the sound is more like that rather than the thicker sound I get from my Willsenton R8. The midrange is kind of like that clear tonal purity of the First Watt F6 or my Dennis Had Universal SET running 6L6 tubes but with much more satisfying bass and even more separation and richness overall. The GaN 400 gives the music a level of vibrance and immediacy that is quite remarkable and I haven't heard any glare and I don't find the amp fatiguing. But if you want that very wet, smooth, warm tube/vinyl sound it might not be the amp for you. I want to listen more and do more comparisons but I'm pretty sure this will become my standard amp.

The GAN 5 has a lot of the same qualities of the GaN 400 but with a touch more warmness and smoothness. Bass is different also, a bit less tight and a tad boomier. The biggest difference is in that sense of spaciousness, clarity, separation and tonal purity. The GAN 5 simply isn't as good or dramatic in those respects compared to the GaN 400. The GaN 400 sort of demands your attention because each element of the music is distinctly separated while the GAN 5 is more 2D and smoothly mushed together. I haven't gone to the trouble of replacing the GaN 400 with my M2x so I can't make an informed comparison there but my guess is that the GAN 5 sounds quite similar to the M2x which is a pretty high compliment in my book.

The GaN 400 gives me something I've never heard in my system and I like it very much. I think I am going to be more than happy to trade off some midrange richness/liquidity for the extraordinary level of detail, spaciousness, and separation that I hear with the GaN 400. The GAN 5 is a very good amp, especially at $750, but it doesn't give me that wow factor the GaN 400 does. Given the price I don't think I would have any trouble recommending the Mini GAN 5 but I think the Peachtree GaN 400 is the one I am going to keep.

pinwa
Thanks @pinwa, I was hoping someone would do what you've done. Finally, we have a head-to-head comparison with the little Class D GAN 5 in the mix. Your contribution is much appreciated.

Happy Listening!

Sounds to me like the US made Class-D Audio GaN5 held it’s head up nicely for $750 against the $3,000 Peachtree 4 x more expensive!!!!!

And it has gain switching also 100kohm input impedance, which is a big
+ for going direct from Dac with volume or using a tube or passive preamp.

Cheers George
I had been looking at GaN amps over the last month, then the news from Peachtree on their new amp.

I traded in my amp500 so my cost was just $250 more than the GaN5.

My GaN400 shipped today.

Meanwhile, I just have my Raven Blackhawk Mk3.1 while I wait.


Post removed 
The Peachtree trade-in program is certainly what motivated me to pull the trigger on the GaN 400

I will be very interested in hearing your comparison with the Raven Blackhawk.  The GaN 400 doesn't have a rich, rounded, tubey sound so I imagine it will be quite different.  
Thank you !!! Very helpful information.  I received my Peachtree GaN 400 today- stay tuned-  I will pair it to the Rme adi-2 fs dac and Moabs. Anyone has law have any experience with the RME Adi-2 fs dac? Thanks…

Hi pinwa,

Thank you for the information about the Gan400 and the First watt amps.

I want to upgrade my Peachtree Nova amp and find myself on a kind of a similar path that you are on. The Nova is a bit thin, I am thinking of the Peachtree Gan400 but you said it has the same issue. Then there is the First watt Sit-3.

What amp + preamp would you recommend?

Thanks

 

 

There are lots of discussion on pros and cons of all kinds of amps, what is missing on GAN amps is all the components in the system.

When amps are discussed, they can be warn, neutral or cool.

When someone does a good comparison, they change up the components. I have seen 4 mainstream reviewers discuss GAN amps that are out and the components they changed and how that affected the sound of the amp. They also compared to other non-GAN amps and how they sounds against each other.

I make my judgement on how it sounds in my system. I also have other amps that are SS and tube to compare. The GAN amp has be added to my working collection.

GAN technology is here to stay.

@tjag I've never heard the SIT-3.  If thinness in your current amp bothers you don't buy the GaN 400.  I am the wrong guy to ask about preamps as I'm still searching for one I like and can afford.  I absolutely loved my time with the GaN 400 and it  beat out all the other amps I tried until I got a 300B tube amp.  Right now I am using an Aric Audio Super 300B SET amp and am stunned by how good it is.  But you need very efficient speakers and a preamp with gain to be happy with a 9 watt amp.

The reason my Nova sounded thin was the power cable connected to the DAC. Once I changed it the problem was gone. 

Post removed