New turntable SRA questions

Just place a "thick" LP under the new mat (really thick would be around 2mm/really thin would be around 1mm) and see if it sounds better after readjusting the VTF.

The VTA of the stylus comes first, IMO.

I've owned many, many, many decks with SME arms, without the arm being totally parallel to the disc/platter, and they all sounded super once I dialed in the VTA.

I assume that "parallel" may be a bigger factor on some arms, but I have not experienced such with my older (various) SME's.

DeKay

rwkn22:

SME is a manufacturer/brand.

My various models have/had adjustable tonearm height (seems yours does not), but they (my older models) are tedious to adjust.

I'm picky, but also practical (meaning old and lame), thus using a shim mat for thinner LP's works for me.

The thinner LP's sound brighter (lighter in the LF's) if I do not use the shim mat to raise them.

You may experience the same (fuller sound) by trying a shim mat (an LP under the current thinner mat in your case - as it's an easy zero cost experiment).

The Grado cartridges I use are more sensitive to VTA VS the old Sure V15III cartridges I used to use.

Anyway, if it sounds good it is good.

DeKay

Holmz:

1.5-2 mm makes a big difference in SQ with my current deck/cartridge (same with the past ones).

As adjusting the arm height on my current SME 3009 non-improved is a PITA I set it up for average thickness LP's and I use a lifter/under mat for thinner LP's (the thinner one's are generally "import" LP's from Europe issued in the 70's/early 80's).

I'm currently using the first version of the Grado Gold Prestige (previously used the Silver version).

All styli have been OEM.

DeKay