2. speakers
  3. 1030467335

Need Maggie MG-2C help....

I just recently got a nice pair of these. Very clean, no torn ribbons, and no rattles. First, I'm using a Counterpoint SA-100 amp that's 170 wpc @ 4 ohms. This amp was great on my SMG's, but seems a bit weak on the MG-2C's. Would I be better off with something in the 400 wpc range? Second, I finally got them positioned right where the soundstage is large and has a prominent center image. But to me these speakers seem to be a little harsh in the midrange area, something I didn't experience with the SMG's. So have any of you had this same problem? I was thinking of changing the x-overs, but not sure what to get. Any help appreciated!Thanks,Danton
evander

Showing 2 responses by jimbo3

jimbo3
304 posts
 
You need more power. The Counterpoint SA-100 is 100 wpc @ 8 ohms and is not quite enough. Try the SA-20 or SA-220. That should fix most of your problem. You could also change jumpers, if possible. A powered sub w/active x-over is another option, too.

Regards
Jim
jimbo3
304 posts
 
With all respect to the previous post, Maggies are notoriously inefficient and, the larger the surface area, the more energy it will take to drive them.

There is no direct relationship between speaker impedence and it's efficiency. If there were, all speakers of a given impedence would have the same efficiency rating (measured in dB @ 1 watt @ 1 meter).

I happen to have a pair of 12's and tried the SA-100, but had a similar experience to your's in that the sound was weak and turning up the gain only over-drove the amp which resulted in some harsh-sounding mid-bass/mid-range and sometimes strident highs. The SA-20 cleared that up.

Maggies are very revealing speakers and you need a fair amount of high quality power to drive them well. Don't discount that there might be a problem with the speaker as Fdriver suggests, but first borrow some more power (around 200 wpc)and see if that solves the problem.

Let us know how it turns out.....

Regards
Jim
More to discover