Looking for thoughts from Nottingham Analog table owners


Really like the looks and the build quality of the Nottingham tables, and it does not hurt that I am originally from Nottingham, England to start with...lol
But I have read a few reviews that claim they are pretty tricky to set up and some suffer 60hz hum fairly easily?
Would like to hear from actual owners, your arms, carts etc
Would be upgrading from a Funk Firm Vector with Grado Gold which is deathly quiet as far as hum and in its own right is very musical in my rig.
Thank you
128x128uberwaltz
I should add, the Linn Basic was a big improvement on my previous Rega. So the NAS Mentor was >> Rega.
Not hard to set up. Just make sure that you set up on a dead, non-resonant shelf, like Baltic Birch plywood, or better, panzerholst. And I would avoid the NAS arm unless they've improved adjustability a whole lot. But with the Trans-Fi air bearing arm at $1000, punching at 5x it's weight, why use anything else?

Consider the Trans-Fi turntable while you're at it.

bcowen- I am familiar with Pear Audio. I believe the Palmers also implement some of Mr. Fletchers designs in their tables. He must have been doing something right (-:  I do like the look of the Palmer and AW in particular. I think AW also does a bamboo plinth along with their Baltic Birch Ply. I wold say Pear seems to be getting the most exposure at this point, even more than Nottingham. Analogue Works is a relatively new company though.
*Disclaimer: I am a dealer for Pear Audio Analogue products.

The Pear Audio Blue Kid Thomas, Kid Punch and Kid Howard are the ONLY turntables that were actually designed by the late, great Tom Fletcher, other then the older Nottingham Audio models.

With all due respect to bcowan, the Pear Audio turntables and tonearms are quite different in construction, fit and finish than the old Nottingham products.  I have owned a few Nottingham models in the past and I will say that the Pear Audio turntables surpass the Notts in virtually every way.  For example, while the Pear Audio Cornet 2 tonearm resembles the old Space/Anna tonearms, it is quite improved in construction and sound.

I have taken Palmers in trade for Pear Audio models and I again must say that there is simply no comparison.  Palmer copied some of Tom Fletcher's ideas but ruined the benefits by uselessly elevating the platter and tonearm (remember kids, low center of gravity is your friend) and sitting the motor unit inside the plinth with minimal damping.  The first time I demo'd a Kid Thomas for a customer in his home, side by side with his Palmer, his wife (upstairs) yelled down to ask what he did to improve the sound.  It was THAT noticeable.
What are the associated components in your demo system at your dealership?