2. amps-preamps
  3. 1294396012

Jolida sj502a tube advice

Hello
I just bought a Jolida sj502a tube amp and was wondering what tubes would you recommend and what will they do to the sound of the amp.

Currently has Sovtek 6550we x 4, Jolida 12ax7a x 2 and some 12at7 tube with no writing except the model numbe on the side of the tube.

I like a liquid, warmer laid back sound with really good detail and a solid bottom end. I find some of the tubes are to "detailed" and the mids/upper end is right in my face and that doesn't work for me.

Any suggestions would be helpful. This is my 2nd all tube amp but I am still a newb at the tubes. I will tube roll at some point to try it and see the difference. The one thing I love about this amp is it is very quite and really does sound awsome. I'm just looking to warm her up a bit more.
This is how I'm running it
Jolida JD50a control center into the 502 into Energy Veritas 2.3's through Harmonic Tech Pro-9 speaker cables.
I have an Oppo BD-83SE with the upgraded analog section and Sabre DAC's. I am currently trying different IC's as I have a few different ones and I build custom IC's so I am trying those as well. You definateley get instant feedback when I cahenge my IC's which is what I want anyways.

Thanks again but no $400 tubes except maybe to replace the 4 6550s.

Mark
128x128eagleputt

Showing 2 responses by mechans

mechans
3,048 posts
 
The $400 is well spent on reissue Gold Lion KT-88s. I was really pleased with the impact it had on my sound. I won't say that they have a warmish darker sound. The Chinese 6550s sound SS liketo me I find much more midrange with the GL reissues and none of the Bang and sizzle I hear with current production 6550s. Just MHO, feel free too argue.
If you really want to warm up the sound then rolling the input tubes will likely do the trick. Unfortunately you are going to have to be a good shopper and find some original Mullards preferrably 50-60s Blackburn 12AX7s. You can get them as used for a lower price and most will last a very long time. The same advice for the 12AT7s get real old Mullards.
They won't cost you $400/pair if you shop around if you buy absolutely perfect NOS tubes from certain dealers they will but you don't have to go that route. Check out Brente Jesse at audiotubes.com or Upscale Audio or some of our Audiogon regulars like Jim Sautter and see what they have in your price range. In any case the GL KT-88s are a must.
mechans
3,048 posts
 
Johnsonwu,
I respect your opinion without knowing how the 502 sounds with these mods. I expect they really will make an important difference.
However most of us are not equipped to do the mods ourselves or have access to electronic technicians who we know who will perform mods they don't use themselves or don't suggest recommend themselves. Controlling costs and assured quality by after market modification represents a challenge to the non DIYer.
Rolling tubes however is accessible and does have a meaningful impact on ultralinear amps, I am sure of this. The input tubes which are not in PP and almost allways have a meaningful impact on the sound. Indeed among many many rolling experiences, In every instance I was able to taylor the sound, except once. (An ARC preamp, which warned that tubes in certain positions, did not impact the sound. They were correct.) Again It is the only instance I have ever encountered in my years of tube rolling.
More to discover