2. analog
  3. 1191104271

Is setting VTF on Graham Phantom fussy?

Please let me explain my question,referring to this wonderful sounding arm......
I have a 2.2,and my friend has the Phantom.I find that our cartridge(Orpheus) VTF requires a "slight" adjustment in VTF once in a while.Actually we both find the benefit of re-setting VTF about once a week(or more often if we feel like being picky).
My concern with the Phantom,which I have good experience with,I "think"(in my friend's system,as I have been his set-up guy for awhile)is that it seems to be much more difficult to set the VTF,without having it's bearing block shift,causing the arm to pull(off it's rest,or the VTF guage),and making re-checking of VTF a real pain in the tush,as compared to the simple,and reliable way it can be "instantly" done on the 2.2!
Maybe I am not familiar with the ergonomic aspects of the Phantom,which "ownership" allows one to get a handle on,but I am seriously interested in moving towards purchasing a Phantom,in a few months,and want to know if this is a problem with my friend's arm,or my approach to an arm I am not as familiar with,as my 2.2.I hope the latter!
As of now,when I want to adjust VTF on my 2.2,I hold the bearing block steady,with my left hand,and twist the counterweight knob with my right hand.I DO move the arm to the "rest" position when doing this.
Whenever I do this with my friend's Phantom,the bearing block "shifts" and requires a repositioning,to realign the pivot/magnaglide.This "then" causes the arm to shift/slide,as though it was sliding on "ice".It seems to be finicky about getting it aligned again,and requires it being "re-centered with the bottom plate",and sometimes pulled up/pushed down on.NOT confidence building!I hope the problem is my technique!!
There is none of this with the 2.2,but my friend claims that the arm does not have to return to rest,with the Phantom,when adjusting VTF,and keeping the arm,just over the downforce scale while making the VTF adjustment will not cause this shifting action,of the pivot.He did not demonstrate this to me,very well,and I am concerned.
I am VERY interested in acquiring this product(among one or two others),and would love some feedback from owners who,hopefully,can tell me that my approach,on the Phantom is wrong.
Thanks in advance.
sirspeedy

Showing 1 response by larryi

larryi
3,718 posts
 
Sirspeedy,

What, if anything, is the issue with arms with the older magnetic stabilization device? I am just curious because a friend has a Phantom bought somewhere around five months or so ago.

We have tried it with several different cartridges -- Lyra Titan, Transfiguration Phoenix and the Orpheus. I have also heard the Orpheus in a Vector Arm in two systems (including my own system) and in an SME 309 with upgraded bearings, dampening trough, etc. The Orpheus sounded good in all of the setups. It did not strike me as being particularly fussy about VTF, but, I did not do a lot of auditioning at different settings (a big p-i-t-a with my Vector arm). The one "objective" test of tracking ability (using the Shure V test record) showed that the Orpheus tracked much better in the SME arm than either the Vector or Phantom. This is a torture test so I don't give the result much significance when it comes to regular music (I use that test to set antiskating).
More to discover