If you have spent the money to bi-amp your system, my suggestion is to go the extra step and get an electric crossover. In my humble opinion, this produces the best bang for buck upgrade in sound.
Idiotic Vertical Biamping Question
I've read a couple of detailed articles on the various kinds of biamping.
I understand vertical biamping to be: amp1 uses left and right outputs to speaker1 (we'll say that's the right speaker); one channel to woofer and one to tweeter; and amp2 does the same, but to the left speaker.
We're assuming a two-way speaker.
Now, I assume that each amp still "thinks" it is sending full-range signals out of both channels. So for amp1, let's say the right output channel feeds the woofer while the left output channel feeds the tweeter. The amp is sending information meant for the left speaker to the tweeter of the right speaker. Same problem occurs in amp2 (but possibly with reversed content going to woofer instead of tweeter, depending on whether the channels are wired identically or in reverse of amp1).
It seems to me this would cause tremendous problems in imaging. So there *must* be something I'm missing; can anyone help me out?
Also, every article I've read discourages bridging stereo amps to make them monoblocks, though the reasons vary. What are your experiences with such a setup? I was specifically thinking of getting another McCormack DNA-.0.5 and having Steve convert both amps to monoblocks, thinking this would be the best performance I could get, but maybe that is not the case?
Thanks for the insight, all.
HC
I understand vertical biamping to be: amp1 uses left and right outputs to speaker1 (we'll say that's the right speaker); one channel to woofer and one to tweeter; and amp2 does the same, but to the left speaker.
We're assuming a two-way speaker.
Now, I assume that each amp still "thinks" it is sending full-range signals out of both channels. So for amp1, let's say the right output channel feeds the woofer while the left output channel feeds the tweeter. The amp is sending information meant for the left speaker to the tweeter of the right speaker. Same problem occurs in amp2 (but possibly with reversed content going to woofer instead of tweeter, depending on whether the channels are wired identically or in reverse of amp1).
It seems to me this would cause tremendous problems in imaging. So there *must* be something I'm missing; can anyone help me out?
Also, every article I've read discourages bridging stereo amps to make them monoblocks, though the reasons vary. What are your experiences with such a setup? I was specifically thinking of getting another McCormack DNA-.0.5 and having Steve convert both amps to monoblocks, thinking this would be the best performance I could get, but maybe that is not the case?
Thanks for the insight, all.
HC