The reason why you don't know where to put the third wire is because you would need truly balanced (differential circuitry) with a +, -, and ground. I disagree with cytocyle on the mod significantly reducing the value because the ports are already there, but you won't get a fully balanced signal chain. I do agree with him that an XLR-RCA cable will accomplish the same thing, but those are not cheap and have pretty limited resale value (I know). If you go the cable route, make sure you verify which pin in which on the Krell. there is a common but not universal standard.
How do I install female XLR's in Aragon amps?
Long ago I bought two Aragon 8000-series amplifiers with RCA inputs but with blank ports (plates with screws) to allow installation of balanced XLR jacks (female, I presume). I just bought a Krell processor with balanced XLR output, but unfortunately, Aragon has gone out of business and I can no longer find a dealer to convert the amps to XLR. I would rather do it myself by purchasing Neutrik jacks and soldering the wires.
The problem is that I do not know which wires on the RCA jacks to solder to the XLR's. I assume that the outer-shell RCA wire (ground or female) is to be attached to the ground lead of the XLR and the center RCA wire (signal or male) is to be attached to the positive lead of the XLR. Is this right? But where do I attach the third XLR lead in the amplifier? Is there a shield wire? To the chassis?
Aside from the wiring problem, will I have a problem with a larger input voltage or any other unforeseen problem. If Aragon provides the port, I assume not, but I'm not sure. Please help!
The problem is that I do not know which wires on the RCA jacks to solder to the XLR's. I assume that the outer-shell RCA wire (ground or female) is to be attached to the ground lead of the XLR and the center RCA wire (signal or male) is to be attached to the positive lead of the XLR. Is this right? But where do I attach the third XLR lead in the amplifier? Is there a shield wire? To the chassis?
Aside from the wiring problem, will I have a problem with a larger input voltage or any other unforeseen problem. If Aragon provides the port, I assume not, but I'm not sure. Please help!