Esoteric VRDS-NEO not reading discs


I have an Esoteric K-01 cd/sacd player that is around 7 years old.  Recently the transport tray began to have a problem.  It would only open part way on the first 3 trys.  I was told that it needed a new transport drive belt, so I replaced the belt and the tray opened fine.  However, now the laser does not read the disc consistently.  It has played fine for a few hours, but most of the time it reads "no disc" or "disc error."   have contacted Esoteric and there only response is that I need to send the unit to an authorized Esoteric repair center.  They also have told me that the service manual is not for sale to the public.  This unit has been off Warranty for many years.  The cost to send it to the repair center is over $100 each way.

All this trouble for a part that costs around $0.40 for a generic replacement, and $16 for an authentic belt from Esoteric.  This player cost around $20k new and it is  rendered inoperable after 7 years because of the failure of a cheap belt. I do not think I should have to pay hundreds of dollars to have it repaired.  It does not seem fair to me that Esoteric will not help me to fix this problem myself.

What do you think?  Is there anyone out there who can help me to understand what the problem is with the laser not reading discs properly?  I am willing to pay someone for their help.

russ751

Showing 2 responses by mastering92

@russ751

Maybe try the Allsop CD Laser-Lens Cleaner before you send it off. Ultimate 8 brush system. After it loads, it instructs you skip a track and when to remove. It was the only one of its kind that worked for me after trying a few others. It worked right away. May also help with skipping CD-Rs.

The tray and pickup assembly probably just needs realignment and to be plugged out/in again with a power cycle. This is also an easy fix unless the CD player is seeking back and forth on its own. In that case, it is likely a mainboard issue: track 1, changes to track 5, then to track 2 etc. basically driving itself crazy.

 

best on the market no doubt

in case it happens again.

if the laser fails, replace the optical pickup.