Defective REL G1 Subwoofers


I have gone through 3 REL G1 subs. The first 2 have been defective. The third seems to be OK.
The first two subs both made noise when the phase switch was put on 180. This was with the high level Speakon connection and playing music.
Everything was OK back at the 0 phase setting.
Both subs bottomed out frequently on low level LFE connection in both phase settings.

The third sub seems OK in all situations. Maybe a bad run on the first two?? Sumiko claims they have not seen these problems.
Anybody out there with defective REL G1 subs?
rhbblb1

Showing 1 response by dejiniro1

I've owned REL for several years now. I just picked up a G1 to replace a R505. Let me tell you if you haven't calibrated your system with a sound meter or receiver software the things that have been described in previous post are bound to happen. I know because I initially bottomed out my sub due to user error or lack of proper setup. Once I did the right thing and used a sound meter and properly set the crossover point and levels for a true sub bass system it shakes my 3000sq ft home no problem except the wife hates it. I run all Audioquest cabling including a CV-8 that Audioquest properly terminated for the neutrik connection. I run Vienna Acoustics with my Rel in a 13 X 22ft rm. My crossover point is set at 57hz, LFE is at 14db(calibrated with a sound meter its set at 12db) and neutrik at 13db. In regards to phase change. If you here a slight thump that is normal in most subs when you change phase. In Regards to made in China most manufactures now send there individual parts to be assembled in China, just like my high end Ipad and killed the tablet market. That remark has no valor anymore. Thanks for listening people.