Considering the New Tekton Design Encores? AND Owners Group - Experiences/Questions


I am the very happy owner of the first pair of New Tekton Design Encores and I thought I would create this thread to answer any questions anyone might have regarding the Encore speakers, room considerations, and associated equipment. If you’ve order your pair already, please chime in. I really want to hear what other people’s experience are with these unbelievable speakers.

I drive my Encores with both an Art Audio Diavolo SET 300b Tube Amplifier with 8wpc and I switch in my 700w Nord One-Up SE Monoblocks for non-critical listening and some big pieces of music that benefit from the extra power.



  • Made under U.S. Patent 9247339 with multiple new patents pending
  • Proprietary loudspeaker design
  • Ultra-linear frequency response with ±.5dB deviation from 70Hz-20kHz
  • One single crossover element placed within the tweeter path
  • Ultra-linear, entirely time-invariant minimum-phase mid-range section
  • Proprietary patent pending 15 dome radiating hybrid MTM high frequency array
  • Two 6.5" mid-bass patented ’overtone & harmonic’ transducers
  • Dual 11" low-frequency transducers
  • ​96dB 2.83V@1m sensitivity
  • 4 Ohm design for optimum performance
  • 20Hz-30kHz frequency response​
  • Dimensions Width 13.25" x Depth 15.25" x Height 62"
  • 800 Watt power handling
  • Weight 175 lbs​
128x128jcarcopo
@jcarcopo

Agree with your comments. Dangerous Convert 2 is a great DAC too.

Out of curiosity - are you using XLR out of the Benchmark DAC and in to the HPA4?

Also did you set the Benchmark close to full volume (no resistor pad attenuation and about 2 to 3PM or HT mode) when passing the signal to the HPA4.

You would need to do this to maintain the full SNR performance of the products (maximize headroom).

I am considering the same combination but a loss of dynamics is definitely not a good thing.
@gregb63 Can you share more about your Encores? Thanks.

Tom Vu from TriangleART and I were talking a few days ago and I told him how much I love my [Encore] speakers.
@jcarcopo  Thank you! Looking forward to your take on the DAC3, if you get it. 

If you are looking for other non-tube DACs with a preamp function (within budget), also consider the Metrum Adagio.

The new Auralic series are certainly worth exploring also.
@shadorne Yes the Dangerous Convert 2 was extremely competant and yes I did connect both dacs to the HPA4 via balanced and used HT BYPASS on the input and ensured the internal dac2 jumpers were set to zero db.  I spent 2 days swapping from source direct to the HPA4.  I kept hearing a dropoff of sparkle and transients on guitars. It was a tad veiled and homogenous sounding, like a coating on everything I played.  This phenomenon happened in equally to both dacs.

@david_ten i will check out that dac you mentioned. 

I placed my order for the Encores yesterday morning. A big thanks to jcarcopo for generating this plan and for his trailblazing commentary on this speaker. Based on my experiences with the Double Impacts and Double Impact SEs, I have no doubt that the Encores are very special. I can't wait to hear them in my system!