The only thing you are potentially doing is raising the frequency of the -3dB down point in the low end.
Cary SLP-05 Output Capacitor Question
Is the KimberCap .33uF and MultiCap 1.0uF combination on the SLP-05 the output capacitor between the tube and the output? I am using a Marchand XM126 crossover with a 1,000,000 ohm imput impedence. The V-Cap output capacitor calculator indicates I can use a .08uF cap with a 2hz low frequency cutoff. I have previously reduced the .33 and 1.0 combination to a single 2.2uf Mundorf S/G/O cap but hope to be able to reduce those to .1uF V-Cap CUTF caps.
Any answer or advice would be appreciated. Mike
Any answer or advice would be appreciated. Mike