Cable run in burn in time


Hello,
I am doing a research on cable burn in time. One of the answer came from a sellman on local audio store was that if as long as I disconnect the cables from the component I have to restart again. The time is depends on cables maybe shorter or the same as begining to burn in a new cables. He said that during burn in a cable or on regular play, signal will settle down the cable and also build up the electro magnetic around it as same as the component. So as soon as the cables are disconnected the magnetic is discharge. If this is true, the cable cooker is a help but not much because the cables have to disconnect from the cooker, and testing a cable to match up a system will be harder and longer.
Thanks for all your opions and helps.
Regards
amthanh

Showing 2 responses by sonic_genius

I agree with Jayceem about the dielectrics. I do know in the case of capacitors that once they are formed-up they stay that way. I replaced some Solen caps with Hovlands once and when new they were bright and hard. After about 200 hours they smoothed out. I pop this preamp (Sonic Frontiers) in my system on occasion and it sounds fine every time.

I am now becoming suspect about cable cookers. On some cables my Audiodharma cooker makes the cables sound worse (Pure Note) on just 24 hours cook time. These cables were perfect before I re-cooked after I had my Siltechs in my system for several months. I called Pure Note and they said do not cook (they no longer use the Audiodharma). Pure Note says they have learned with their 7 nines wire that the cooker will temporarily alter the wire (makes it sound thinner) until you put several hundred system hours on them again. I believe AudioEngr (Empirical Audio) had the same findings so cooking may be a bad idea with some cables.
A rebuttal from the man who makes the cable cooker as posted on the Cable Asylum:

http://www.audioasylum.com/audio/cables/messages/75312.html