128x128

swordshield

Responses from swordshield

Magnepan 1.6 active 24db slop better than stock?
I sure hope your wrong about freq.Manuel says 600Hz.Just got them going tonight,got the active set around 750Hz ,I thought for good measure to start out at.I want to retube my amps(just got amps- old tubes) before I make any conclusions.My mag .5'... 
Magnepan 1.6 active 24db slop better than stock?
Thanks Grege,I'm going to hook up one channel passive,straight shot right out of my preamp to one amp to passive crossover.No other sub, Magnepans only.Then on the other side I'm going to hook up two way active, Magnepans only no other sub.Back an... 
Magnepan 1.6 active 24db slop better than stock?
Hi Ngjockey,I went to Asylums and all over the web and found nothing on the subject of high slopes and noise.Do you know any other sites or pacific treads at Asylums dealing with noise.I thank all the plus factors outweigh the asymmetric slope but... 
Magnepan 1.6 active 24db slop better than stock?
Yes I would bypass the crossover's completely.Hoping theres somebody out there thats done it that can help.+Pluses+,extra power,24db slope verses 6&12 db slope.I have everything to do it,if it's going to improve I want to do it. 
Oregon Audiophiles...
audiophile living in Florence 
can a Forte model 1 be bridged?
Mofimadness,I contacted Jon Soderb,he said no go.Thanks for your help Mofimadness, swordshield 
Toslink or 110 ohm aes/ebu?
Made a mistake,should not have said one DAC but NO DAC. 
Toslink or 110 ohm aes/ebu?
I'm running my upper end all analog, cd player-preamp-amp. Want to take a digital signal from my cambridge 840c, Toslink or SPDIF to a Behringer DEQ 2496 with AES/EBU or Toslink to do some bass eq then to another preamp to control volume .Everytha...