henrylr

Responses from henrylr

Looking for foam surrounds for SD 300ti
Hi,I also need foam surrounds for my 300Ti mids. I measured the surrounds while still attached to to the basket and cone, with a dial caliper, and the O.D is 4.5" and I.D is 2.875". That will allow a 3/16 overlap on the cone if the cone O.D. is 3 ... 
bi-wire vs jumpers
I am still not sure I understand the point of Roscoe's post. Is cable considered better than a jumper? 
bi-wire vs jumpers
How does stripping an extra inch off the cable and running the same wire to both terminals differ from a jumper? 
Thoughts on very cheap speaker cables
My latest thought has been to put 3 lengths of the 22 awg copper wire, described in my first thread, inside 3 seperate lenghts of cotton with a low dieletric constant of about 1.3. Braid 4 groups, each made up of the of 3 cotton encased wires, and... 
Thoughts on very cheap speaker cables
Does anyone know the awg of Mapleshade's speaker wire? Is their cable made up of a single wire for + and a single wire for - connectors on a speaker?Thanks,Henry 
Thoughts on very cheap speaker cables
I have 500 feet of the wire so i was also thinking of twisting 2 wires for the + and 2 wires for the - for each speaker. This would result in 8 12 ft lengths of 22 awg. I think the result of twisting two 22 awg wires would = about 18 awg. Does tha... 
Thoughts on very cheap speaker cables
I am not an engineer and have no desire to enter the speaker cable business. My reason is to try to improve the sound of my system with much smaller diameter cables without spending $$$$ for cables. The cables currently in use are XLO reference se...