apb3rd
Responses from apb3rd
| Eminent Technology ET-2 Tonearm Owners Interesting, I have some neodymium magnets and blue tac so it will be easy to try. I researched repairing the Jun Air pump and it is a loss and can’t be repaired. Luckily I don’t have much invested in it. I have procured a 2 gallon Fortress c... | |
| Eminent Technology ET-2 Tonearm Owners I suspect you mean the magnet below the spindle just above? | |
| Eminent Technology ET-2 Tonearm Owners With my cartridge having a compliance of 15x10(-6) I don't think I need the magnet but I may try it just to eliminate the approach. How do I pick a magnet of the proper strength? I think I need to rebuild my P15TC pump as it can't quite keep up... | |
| Eminent Technology ET-2 Tonearm Owners I stand corrected. I do have the Takatsuki app6ga which only has the model number and no manufacturer. I always thought it was by Wisa. I finally got the Jun Air pump working (actually my version is by Werther international, P15-TC1) and it wo... | |
| Eminent Technology ET-2 Tonearm Owners I am will be using the Jung pump so I don't have a problem with having enough pressure. I'm currently existing with the original Wissa. Before my move I ran it off a shop compressor at about 17psi. It was about 100' away so I did not use a surg... | |
| Eminent Technology ET-2 Tonearm Owners apb3rd formally apbiii For the record I am resurrecting a TNT / ET 2.0 high pressure setup after a 5 yr delay after a move. | |
| Eminent Technology ET-2 Tonearm Owners any body understand using a bleed valve to keep the pressure regulator steady? | |
| Eminent Technology ET-2 Tonearm Owners apb3rd, formally apbiii Is anyone still interested in this stuff? | |
| Cartridge upgrade Thanks, both posts are very interesting and provide food for serious thought. I probably need to visit some high end emporium and get acquainted with what modern high end has to offer. I am not sure just how much my components can support and no... |