Hevacel,
I couldn't agree more!!!!!!!
Everyone, please note that bare copper wire not only will not provide any benefit to your listening experience but is a safety issue, just as it would be if you were using bare copper wire as your speaker cables.
You should be protected from the power grid by your amplifier, with particular protection provided by current limiting devices in solid state amps and output transformers in tube devices. The voltages in your speaker cables are not considered to be lethal by the worlds safety agencies but using bare copper wire will still cause destruction of your equipment.
However, as an added safety note, you should not at any moment interrupt the connection to safety ground in your equipment, unless you know for a FACT that it is "Double Insulated". All two prong plugged electrical equipment must be double insulated to pass UL, CSA or CE and thereby are safe to use without a third prong connected to safety ground. You should never use a safety ground defeating plug, period. Use isolation signal transformers from Jensen, Sowter, O-Netics, Lundahl and others to break the ground loops in your equipment, if you are suffering hum problems. You will not suffer a degradation in sonic qualities by doing so.
Our Ground Control has as much protection from accidental exposure to safety ground as does the typical speaker cable, with only the prongs of the mounting fork or body of the RCA plug being uncovered by a suitable dielectric material. Even the 140 strands of four nines copper wire are insulated, individually. You can use these devices without fear of death or destruction, RF noise or self levitation.
As for experimenting, if you don't use an insulated wire, you will get no benefit, so don't bother.
Bud
I couldn't agree more!!!!!!!
Everyone, please note that bare copper wire not only will not provide any benefit to your listening experience but is a safety issue, just as it would be if you were using bare copper wire as your speaker cables.
You should be protected from the power grid by your amplifier, with particular protection provided by current limiting devices in solid state amps and output transformers in tube devices. The voltages in your speaker cables are not considered to be lethal by the worlds safety agencies but using bare copper wire will still cause destruction of your equipment.
However, as an added safety note, you should not at any moment interrupt the connection to safety ground in your equipment, unless you know for a FACT that it is "Double Insulated". All two prong plugged electrical equipment must be double insulated to pass UL, CSA or CE and thereby are safe to use without a third prong connected to safety ground. You should never use a safety ground defeating plug, period. Use isolation signal transformers from Jensen, Sowter, O-Netics, Lundahl and others to break the ground loops in your equipment, if you are suffering hum problems. You will not suffer a degradation in sonic qualities by doing so.
Our Ground Control has as much protection from accidental exposure to safety ground as does the typical speaker cable, with only the prongs of the mounting fork or body of the RCA plug being uncovered by a suitable dielectric material. Even the 140 strands of four nines copper wire are insulated, individually. You can use these devices without fear of death or destruction, RF noise or self levitation.
As for experimenting, if you don't use an insulated wire, you will get no benefit, so don't bother.
Bud