2. tech-talk
  3. 1195925775

Aluminum in cld plinth

I am about to embark on my journey into the diy of plinth building. I have been through the other mega thread but thought I would ask for some input separately.

My question ... Does the use of aluminum in the layers help, how many layers(of al), and what thickness? I have a bunch of 1/8" 5052 at my disposal.

thanks
fordmod
mrjstark
1,112 posts
 
It might be worth a try. How do you plan on implementing it into your design? All aluminium or sandwich together with another material?
jtwrace's avatar
jtwrace
443 posts
 
I personally would use 6061 or 7075. I would use 1" thick and CNC it. I have access to the machines so it is a bit easier for me. With that said, if you are looking to do this yourself you can.
fordmod OP
30 posts
 
Mrjstark
I am planning layers of 3/4" birch plywood and mdf, and am wondering if sandwiching some aluminum would be of any benefit, as I have the 1/8th sheet for free.

Jtwrace
I dont have the cnc machines to cut this but I an sure I have the connections. I would want to know it is worth it, if I were to call those favors. I can cut the thin sheet myself with stuff I own.
As always thanks for your ideas and knowledge!
More to discover