Ground Isolation, removing sibelance.

Mondial "Magic" ground isoation device. About $75.

Mcfarland, thank you very much... I'll look for one of those gizmos if in fact I find the 'cable TV' the culprit, as I do highly suspect it to be... gotta disconnect it entirely first.

As the foremost symptom of ground loop issues is 'hum', or that offensive 60 cycle 'buzz' at the speakers, I'm not realizing that aspect. Simply sibilance. No hum or buzz. Fuzziness in the upper mid to treble ranges... most noticeable in female vocals and somewhat in the brass section, and then only from time to time... not constatly apparent. (if it is constant, I'm detecting it only at some frequencies then)

As much of my system is balanced though, not all, perhaps this is offsetting a good portion of the 60 cycle buzz, normally associated with ground loops.

I mainly suspect (if it's not the cable TV), it may be 'digital DC leakage' finding it's way back into the system. I'm gonna start the unplugging and flipping breakers today.

I did also run across the link below by doing a 'Google' search for "cable tv hum". The info provided therein is quite extensive and easily understood... with several possibilities outlined and a method for ascertaining just where the problem is or may be.

http://www.audioholics.com/techtips/setup/avhardware/groundloopcableTV.php

Probably not the last word on things but quite thorough and beneficial.

A quality iso transformer integrated in at either the service panel, or breaker box would be my prefference. As it covers a far wider approach... isolating the 'cable TV' ground, an additive measure of far less cost is also my pick. Between the two items things ought to shape up.

I'll follow up with my findings.

look at parts express they have a little black on for cable hum and its under 10.00 and works

In my experience, negative sibilance is always induced by dirty AC of which we are all victims to one bad degree or antoher. Certainly, common grounding to the neutral buss does not help matters, but I'm not aware that the actual grounding is directly responsible for negative induced sibilance.

You can certainly experiment by floating the ground on all of your equipment (at the wall outlets), have a listen, then try connecting the ground to your cdp only. This should give the best bang for the buck. Yes, there is awlays the safety concern, but so long as one component is grounded, the others will be too from the interconnects.

As for the negative sibilance, since everybody potentially has that problem, most likely you had that problem prior to your recent installation by Verizon, but perhaps not as bad.

The only remedy I am aware of to eliminate negative sibilance (not embedded in the recording itself) is via proper line conditioning. And proper line conditioning implies bi-directional filtering because the digital noise induced by your cdp (or a dac) is bi-directional and it will contaminate your other components. Even if the others are on their own dedicated lines, digital noise is known to make its way back to the service panel.

-IMO