HELP : Best pre and power amps for B&W804 and HTM2


To All Audio Experts,

CURRENT SPECS: I own B&W 804 front speakers and a HTM2 center speaker. I had them powered by Denon AVC-A11SR which is now completely broken beyond repair. I was not all too satisfied with the power provided by the integrated amp to my 804 speakers. I also have a run-of-the-mill progressive DVD player which also doubled for a CD player.

CURRENT USE: I mostly use my system for movies/music in the following allocation: 50%/50%.

NEED: I have between US$5,000 to US$7500 to spend on either (i) an integrated amp that is powerful enough to truly enjoy my 804 speakers or (ii) pre/power amp combination. The total cost should also take into consideration of the relevant cables needed (I think I should upgrade the cables as well).

I might spend another US$1000 on a very good DVD/CD combo player to upgrade such component from the existing equipment.

What is the best match for my current speakers (I want to be able to continue to use my HTM2 speakers in a 3 channel format)?

I don't think I will likely upgrade my speakers in the future (unless they break) nor will I spend more money to upgrade the amplifier once they are purchased (unless again they break).

Although, down the road in a few years, I may consider purchasing rear speakers/sub woofer but am not firm on this.

Lastly, I was recommended to go with Rotel RSP 1570 and RMB 1575 for pre/power amp combo but I understand this is a class D amp (which may be inferior, etc).

QUESTION: What is the best route to complement my current speakers under the proposed budget? I am NOT an audiophile but I also want to have the best components that I can be proud of and enjoy for many years to come without ever considering an upgrade.

THANK YOU MUCH IN ADVANCE FOR YOUR THOUGHTFUL/INSIGHTFUL COMMENTS.
slim1
I have heard/auditioned extensively the Classe CA-2200 (2-channel), CA-3200 (3-channel) and CA-5200 (5-channel) amps with the B&W 804, 803,and 802 (D Series) and the HTM2 center channel that you have. They work very well together and sound very good together.

You are asking about an integrated amp or pre-amp/amp combination. They will only allow you to listen to Left & Right speakers; there is no 3-channel format per se. Do you mean to ask for recommendations for a good surround pre-processor that will decode the various multi-channel digital formats? You did not mention rear/other surround channels; do you have a 3-channel only setup?

In any case, if you wish to utilize a 3-ch or more setup, you'll need a multi-channel surround pre-processor to extract and route the center channel (and surrounds if you have them) information correctly.

If I understand your post above, what you are really in need of is that. Based upon this, I'd suggest a Classe SSP-300 (identical to the SSP-600 but only RCA connections) and a CA-3200 3-channel power amp. You can find an SSP-300 on Audiogon right now for a reasonable price from at least one other Audiogon user. For a player, you may wish to consider the latest Oppo Special Edition Universal Player. You should be able to fit all that into your 7K+1K budget picking appropriate cables along the way.

Please let me know if I've misunderstood your posting and questions...B&W and Classe are tested together but more importantly sound very good when used together.
Dear Zephyr,

Thank you for taking the time to respond to my thread and I apologize to you and others about the confusion (since I didn't know better).

Yes I would like to purchase a system that can utilize all three of my speakers (804 and HTM2 with no rear speakers).

In terms of a multi-channel surround pre-processor, does McIntosh MX-134 qualify (I saw a couple of them on Ebay and Audiogon for a very good price). If so, then would you recommend it given it doesn't have HDMI for HD video?

Thank you.
No worries! The MX134 and MX135 are fine-sounding surround pre-processors however if memory serves from when I auditioned them, you may find that they don't provide all the surround post-processing formats (Thx Ultra and Ultra2) that you may want for future upgradeability. I would suggest you also listen to the Classe SSP-300 as well as the MX134, MX135 and new MX136 (have not heard this one).