Help me Buy an LP-12


I have had a Rega P3 w/ Elys for a couple years and Im bored to tears with its sound. Its nice and non offensive but does not excite me. It cant even begin to hang with my Meridian digital rig. So, I want an Lp-12. I dont really understand all of the upgrades and the different models. Does Sondek refer to the power supply or are all Lp-12's sondeks? What I need is an experienced LP-12 user who can help me put together a starter Lp-12 set( table, arm, power supply, cartridge etc.) That I can look for used. What are some quirks, or certain years, models I would want or to avoid etc. Any advice would be very much appreciated.
jpo55
Go to this page. It tells how to set up an LP12 (All are Sondeks-by the way). Also on this page is a link to a file - LP12FAQ.zip - this gives the history you need and more. Feel free to e-mail me if you need more. Steve
I suggest you start with a Sondek LP12 with the Basic power supply, then upgrade later to the Lingo power supply. If you are buying used, by all means try to get a Valhalla power supply on the cheap -- but the Lingo is much better. As far as "vintage", look for an LP12 that has the Cirkus upgrade (stock since, I believe, the early 90's, but many owners of older LP12's had this upgrade put on). A Trampolin is also recommended - though you can go other routes (Bright Star) to control vibration. As for arms , the new Linn Akito is pretty decent for the money (some say as good as the old, top of the line Ittok). I lived happily with this set-up for 3 years before getting the Lingo, the new Ekos arm and upgraded tonearm cable. As far as cartridges, Linn's cartridges of course work very well with their turntable/arm. I have used the K18 (good) and the Klyde (better), and I tried a Glider before the Klyde (good as well). I am sure many other cartridges will work as well or better, but if you want to keep it simple to start with the Linn cartridges are a good starting point.
I have been happily using an LP-12 (synonymous with Sondek) for about six years. I would very much recommend finding a good used table with the Ittok arm and Cirkus bearing upgrade as previously mentioned. Of course you want to have the table, and especially the arm, inspected by a Linn dealer before purchase. The trampolin in my opinion is less critical on initial purchase - it can easily be added later. The Cirkus however, is a complete rework of the bearing and subchassis that changed the sound of the LP-12 very much for the better (greater neutrality and dynamics). On the issue of power supply, you have multiple options. Many of the used Sondeks have the Valhalla PS, which is a step above the 'Basik' - the 'Lingo' is the rather costly top of the line AC motor PS. However there are some non-Linn aftermarket motor and PS combinations available. One is a DC motor and PS that is very cost effective and an OUTSTANDING performer. I purchased it with some reservation but am now VERY glad that I did so. Apparently now Linn is embracing DC motor drive for the LP-12 in an ultra-expensive option called the SKEPTIK (not yet available). This news only reinforced to me my decision to go DC on my table. The web site for the kit I installed is originlive.com.