Azimuth and the Fozgometer


Finally received the Fozgometer after a 2 month backorder. In the past I have always used a loupe and a front surface mirror to set the azimuth on my Tri-Planar with Dynavector XV-1S cartridge. According to the meter, I was very close to a correct azimuth. I wasn't prepared for the effects that a very slight adjustment would make. Nailing the azimuth has brought my soundstage into tight focus. I have never experienced this kind of solid imaging in my system.
I know that the $250 price tag is a bit steep for something that won't get a lot of use, but this is not a subtle improvement. There are other ways of measuring azimuth, that I am not very familiar with, but I would doubt that they are as easy to use as the Fozgometer.
128x128czapp
Rich, I don't think anyone has used the SoundSmith device except Peter Lederman and his alpha testers.
I just tried my Fozgometer for the first time. I have a Dynavector XV-1s which is low output so I hooked up the outputs from my phono stage (Tron Seven) intead.

The meter correctly identifies left and right signals but doesn't show any movement on the meters.

It looks like there is a calibration of the meters and I tried that; the meter moves a bit as I turn the calibration screw but always goes back to zero.

Any ideas?