2. analog
  3. 1226334926

Lenco owners - arm/cart discussion,suggestions?

Curious to hear what arms others are using on their Lencos, and experiences they may have particularly with MC carts.

I currently have a Lenco L75 with custom plinth and 2 armboards (one with RB300), along with a Nottingham Spacedeck/Spacearm.

Has anyone tried the Spacearm on the Lenco? Any feedback is much appreciated.

What other arms are people using, particularly with low output moving coils?

I would really like to try my van den Hul Condor on the Lenco for a real gauge of the table's performance. While I feel the RB300 is a good match on the table, it will not work well with the Condor.

Just curious of other people's experiences before I drill the other armboard for an A/B of the Spacearm/Condor on the Spacedeck vs. Lenco.

Am considering other arms (SME V, Graham Phantom or 2.2) so any experiences of these with the Lenco would be helpful.

Have also considered something like a Shelter 501 for the Rega arm. Any experiences with low output MCs, RB300, and the Lenco?
mbort
mikeyc8
174 posts
 
I'm seriously thinking of getting a lenco as well, the 103R seems to be a popular choice with this table. I guess I'll have to try it out to see what the fuss is all about.
lewm
12,469 posts
 
Mikey, I don't know why the Denon 103R would be a popular choice to use with a Lenco. It's much more important to match cartridge and tonearm. Once you've done that, you can use that pair on any turntable. Different tts will add different sonic signatures to the basic signature of the cartridge/tonearm combo. The whole point of relating the experiences of myself and Dopogue is that anything goes with the Lenco, or any other topflight tt for that matter. You probably do see a lot of Denons on Lencos, because the Denons are per se among the most popular cartridges maybe of all time. Sorry if I sound too adamant; it's just my $.02.
jj2468
280 posts
 
I think the 103 is simply a good performer and a good value, so it has been widely accepted. I look forward to trying the Graham with other cartridges as well.
mbort OP
16 posts
 
Just as a follow up - I mounted the Spacearm and vdH Condor on the Lenco. Need to resolve some VTA related issues - ran out of travel and still too far above level (and don't want to just use a really thick mat), but all in all my first impressions of the Lenco table are extremely favorable.
audiohifila
51 posts
 
hi,

on the subject of lenco's, can anyone for a jean natais plinith some cone footer figuration for me?

thanks

mike
More to discover