Airport Express / I Tunes PC Setup questions


Painfully new, Newbie question. Airport Express connect multiple pairs of speakers in different rooms, to one I Tunes play list / one stereo sytem wirelessly? My goal is to set up speakers in several rooms of my condo for party music. I was hoping to do it with Airport Express and the I Tunes setup but my research tells me that all Airport Express unites / speaker pairs need to plug into the same stereo in order for the same music to be played over them.

Any suggestions or comments?

Also, what are my chances of getting I Tunes to work well with a Dell Dimension 2350 / Windows XP PC system? What level of savy is needed? My computer skills are basic at best.

Many thanks!

Jim (scrambling prior to Holiday Party on 12/11)
jmrnj
I have a question related to this: So you have your .wav files, or mp3's or what have you, stored on your computers hard drive in digital form. You send those out via the ethernet to your 811g compatible wireless router, which in turn passes on the digital information through the airwaves to the airport express airtunes receiver which is connected to either an amp, or some amplified speakers. Am I correct so far? So where is the digital to analog conversion taking place? Or, is a DAC required at one end or the other?

As far as having multiple speakers is concerned, it seems to me, given my understanding is correct, that you could send your signal to your airport express airtunes receiver via the wireless (btw, make sure to get an 811g and NOT an 811b as the later may be too slow for a streaming audio signal), which is plugged into an amplifier (integrated or separates), and add a speaker selector box to the output of your amplifier, such as Niles or Bryston makes, to send that signal to several sets of speakers. Of course this requires hard wiring the multiple sets of speakers to the switch box, and with all speakers running will be at some compromise to the power of the signal to each set of speakers, but certainly would be an adequate method for party music.

Marco
"is a DAC required at one end or the other?"

Yes, the AE feeds a DAC or SS processor. 80211.g is what the AE uses.

Multiple sets of speakers from one amp is not advised. Most amps are only capable of driving one or two sets of speakers without severe distortion.
Many thanks for the responses.

Audioengr, Another Newbie Question. This may be be a stretch, but I'll ask anyway. Again the intention is to get the same party music playing in several different rooms. Can I send a playlist to two different powersources connected to different speaker pairs in different rooms at the same time? i.e. send one to an AE connected to my Lynn system in penthouse and drive my Totem Staff speakers there and concurrently play the same playlist through a pair of Klipsh speakers (non-amplified) plugged into an Airport Express and an amp on a different floor so we would hear the same playlist in both rooms concurrently?

If this would not work, then what would you suggest instead to achieve this. My hope was to avoid having to embed wiring and speakers into the walls but still be able to play the same party music downstairs, upstairs and on my roof deck eventually in the spring when I install those speakers.

Thanks again.