Power conditioner/strip


I currently am using a Shunyata Research MPC-12 Power Conditioner (with SSF38 ...  Think of a upgrade.  

I was thinking Furutech e-TP80S NCF AC Power Filter Distributor.  Any thoughts on this?  or any recommendations of something better than the Shunyata.  Need at least 6 plugs (and a unit that can handle these "big" plug ends)  

Would like to keep it under 2500. 

Out of the wall i have a dedicated 20 amp line and use Furutech top of the line wall plug.

Thanks

 

 

 

 

mlapenta

I also have the Shunyata MPC-12 with a  Sunyata Venom HC Power Cord.   I run a the pair of Mc275 monoblocks plugged directly into the wall (Audioquest duplex), and the rest of my stereo separate components through the MPC-12 and Venom HC PC plugged into another Audioquest Duplex.  I like the way my system sounds. You can see my setup in my profile.  What do you find lacking with the MPC-12?

I would not recommend a sideways move. If you want to get a better conditioner I would move up in the Shunyata lines. Also, move to a full sized component. If you have a dedicated line... then this makes sense. Also, it is best if you plug your amp into a separate dedicated line, and not into a conditioner.