Does Everyone Use 2 Phono Cables with SUT

This is particularly important when you get into the higher impedance cartridges through high ratio SUT’s

Dave @intactaudio, thanks for this explanation. So my takeaway is that the higher capacitance of standard interconnects makes them problematic for use between a SUT and phono stage, especially if they’re not short and especially if you’re using a higher impedance cart and high ratio SUT. That would explain why I had a problem using the Denon 103 and EMT JSD 6 with an A23 T2 SUT with standard ICs of various brands and why I’ve gotten such a big change from switching to a phono cable that’s advertised for its low capacitance. Nice to have such a clear narrative on this!

@labpro As you can see cable capacitance is the name of the game when it comes to phono cartridges and SUTs. Its important to keep it down as much as possible. The transformer transforms everything- not just the output voltage of the cartridge.

This issue is so important that it may well outweigh the cable brand or the like...

Thank you all for the feedback and advice. 
 

I learned an expensive lesson by using a regular interconnect with my SUT.

I think @atmasphere is correct. “Brand” probably is not as important as the cables capacitance. 
 

I’ll bet there are some decent phono cables, with very low capacitance, that can be purchased at a reasonable price. I believe someone mentioned Bobs Devices.