Headphone amp + DAC + Volume + ROON READY


I am loving my newly purchased headphones so much now that I am thinking of getting a second amp to use in my bedroom.

I am currently using a Benchmark HPA4 + Benchmark DAC3B + Sonore microRendu + Meze Empy.

I was thinking a Benchmark DAC2 DX would sound good, but already have a DAC3B and the Benchmarks are not ROOD READY. So I am curious if there is any other small box solutions that has a headphone amp with XLR headphone output, a DAC with volume control that is also ROON READY. It does not have to sound good as the HPA4, I want convenience and small form factor as the most important requirements.

This does not require analog inputs. I am thinking all digital for the bedroom. I guess the ROON READY has to be accomplished my RJ45 Ethernet or WIFI.
yyzsantabarbara
@gestalt After some more reading on the Gold Note DS-10 it seems like a very interesting unit, especially the ‘Chameleon’ DAC part of it. Gives me some idea of also using this unit with my KEF LS50 speakers and some funky new amp tech such as GAN or Purifi.

I was just thinking headphone amp and now I am already thinking about spending more. Not good.
  
So I went a completely different way with this just now. I bought a 10/10 used Bryston BHA-1 headphone amp for a little under $1K USD. I will use my Sony SCD-1 SACD/CD player and give my old discs a workout with this amp. I love that disk player but have not played it as much as I should.

I am also first sending it to Bryston to have the gain adjusted so that the volume control will have greater range in balanced configurations.

So no need for a streamer at the moment, but I will have a Sonore microRendu freed up soon. The Bryston also has balanced analog XLR outputs to connect to an external power amp. I will hook up my KEF LS50's this way. Great thing with pro gear like Bryston and Benchmark is that you can run very long XLR interconnects.

There are some new and exciting amps technology coming out that I am interested in getting for this setup, GAN, Purifi or Benchmark AHB2. All under $3K each.
Got the Bryston BHA-1 today after Bryston factory made a mod to the gain on XLR. This makes the preamp also suitable for external speakers.

This is an really good headphone amp. A little warm sounding but very enjoyable. It is a nice complement to the Benchmark HPA4 I also have. I like the HPA4 more but the BHA-1 is very nice with that warm sound.
I Just pick up a Chord Hugo 2 + Hugo 2go for my bedroom. I got it because it's a one unit solution and it's Roon ready.  
I am doing a head-to-head comparison of the Bryston BHA-1 vs the Benchmark HPA4. The only external DAC I have today is the Benchmark DA3B. My headphones are the Meze Empy with the WyWire Platinum XLR cable. My digital comes from a computer via a Sonore microRendu.

I am testing with Neil Young’s "Everyone Knows This Is Nowhere" only because I played it last night on ROON + TIDAL and it was what was open when I started the computer. I also love this album.

The volume control on my BHA-1 is stuck at a very low position since it gets way too loud as I turn it. I am around 10 O’clock position, not happy about that, but not a deal breaker.

Before I get to the comparison with the Benchmark, I should state that this BHA-1 was used for the past month in my bedroom connected to a tuner and a Sony SCD-1 SACD player. The SCD-1 has been modified on the SACD circuit and it sounds great on SACD’s even though it is 20 years old. Every night I listen to some SACD’s or tuner and dose off in bed. It is a very relaxing sound, obviously to put me to sleep. The sound is not extremely detailed but rather warm and rounded. I kind of like it a lot. I am thinking of getting a R2R DAC to compliment this system.

Now to the listening session I am doing right now with the Neil Young album streamed via TIDAL to my Benchmark DAC3B (my digital streaming is very good, a 8/10). First up was the BHA-1. The sound stage was bigger than I remembered the previous night on the HPA4. The performers (Crazy Horse) seem farther separated out with Neil singing in the middle. The sound seems have the illusion of extending outside the headphones to the left and right of my ears. I like that. However, with DAC3B the sound seems to have a bit of a blanket around it. The bass is also rather pronounced. Meaning it takes more of an upfront role in the music. My ears also seem to be a little irritated by this bass. After listening to the whole album my ears are not relaxed, a bit of fatigue. This is a new thing with the BHA-1, never happened with the Sony SCD-1 or tuner.

Next, I removed the the power cord (stock Benchmark cord) from the BHA-1 and plugged it into the Benchmark HPA4. I unplugged the DAC3B XLR interconnects from the BHA-1 and into the HPA4. Queued up the Neil Young album and started listening. First thing I noticed was the blanket removed from the sound. The sound was beautiful, not soft or warm, but not hard either. Just crystal clear and non-fatiguing. The sound stage is smaller than with the BHA-1. The sound does not give me the illusion of projecting out to the left and right of my ears. Though the performers are separated and everything sounds correct. The bass is much different in the HPA4. It is not front and center. It is in the background, with clear delineation of the tone of the bass. It is also less powerful, but it seems more correct. Even after some fatigue from the first listen with the BHA-1 the second immediate listen with the HPA4 is fatigue free. Just an amazing feeling listening on the HPA4.

I sold my external 2 channel amps this week so I have been doing a lot of listening with headphones, not my preference during the work hours, but no choice. I get zero fatigue with the Benchmark DAC3B + HPA4 combo.

I am a little bummed today with the Bryston BHA-1 results but I must remember that it sounds great with my Sony SCD-1 SACD player and tuner, No fatigue with that combo, though the DAC in the SCD-1 is not as revealing as the DA3B. I will keep the BHA-1 and keep it relegated to second system duties for sleeping. I paid $900 USD for a used 10/10 unit so still happy about that.

If you are looking to get into headphones, give the HPA4 + DAC3B combo a 30 day trial from the Benchmark web site. Just brilliant.