Upgrade from Cambridge CXN


This is probably the 1000th query like this, but here is my situation:

I have a Cambridge CXN streamer / DAC.  I am not totally unhappy with it sonically, but am not enamored of the software.  I use it for TIDAL.  The unit does not support MQA and Cambridge indicates there will never be a firmware upgrade to do so.  I have not experienced MQA so I don't know if this is a big deal or not.

What say you all?  Can I get anything decent at my budget? 

I don't mind buying used.

Thanks in advance.  I always enjoy these discussions (including the trolls  lol )
128x128markainsworth
Hi big_greg.  Thanks for your post.  After reading your post I took a look at the TEAC unit and am very interested.  The unit has been around now for about 3 years and neither it nor its predecessor, the NT-503 seem to be available used.  That probably means people that have them are satisfied with them.   Do you know if there is a bypass for the pre-amp section?  I have a tube pre-amp that I like and intend to keep using it.
Mark,

I'm using the NT-505 with my tube preamp, but am using it as a streamer only.  If you want to connect something to the DAC, you would connect the TEAC to your preamp as a source, set the TEAC's volume to full and use the volume control on your preamp.  Not sure if that's what you're asking.

You can download the manual and see if it has the functionality you're asking about.  
sounds right .  The CXN has a mode to disable the pre-amp section.  Probably does the same thing just bypassing the volume switch.
Yes, Teac NT-505 has a fixed volume setting to output it to a preamp or integrated amp. That’s what I do. There are several NT-505 owners on A’gon who have nothing but great things to say about it (you can see my posts for my opinions - short version: super impressed).

I’ve never actually seen anyone who has owned it say anything bad about it on any forum, and I looked hard to find because their aren’t many/any professional reviews (at least when I purchased 10 months ago). There are people who dump on it here, but when you press them they admit they’ve never heard it -- they just want to believe the $2.5k Lumin or even the $4.5k Lumin is better.

Dual monoural AK4497’s, dual torroidal power supplies, dual on-board clocks, fully balanced XLR, DSD512, full MQA support, native Tidal, Qubuz support, Roon ready, Lumin software operating system, amazing analog output section, .... For under $2k, nothing not to like. I use it with Audio Research and Spendor D series and don’t feel like it is a weak link at all, though by price it certainly should be.

Teac is the parent company of Esoteric, which some consider to be the overall leader in digital, though fans of MSB, dcs, T+A and others will argue (I have no opinion, those are way out of my price range). But regardless, when you factor that in, not hard to understand why the Teac is so good, as there is likely a lot of technology trickle-down from Esoteric into the Teac. I call it "Esoteric-lite", haha.  (that tends to ruffle feathers of those who sell much higher priced streamer/dacs or who own them I guess)
Dear Kren and Big Greg,

what application you are using for teac 505 to stream tidal without ROON?  If you want to upgrade from 505 what would you choose?