Orpheus
That thought had crossed my mind but was thinking that at 1.0v the input into the phono might be too hot?
That thought had crossed my mind but was thinking that at 1.0v the input into the phono might be too hot?
Reel to reel
I don't have the answer at my fingertips, but I'm positive that you could tailor the output of your reel to fit this; https://www.gearogs.com/gear/54893-parks-audio-budgie-tube-phono-preamp |
Silly question possibly but.....Often there is. As I mentioned earlier with most consumer decks the output is calibrated to 1 volt. But they can do more than that and there is usually a potentiometer that is used to set the output voltage. You can probably guess where I'm going with this. The problem is volume control but there are solutions for that. With some tinkering you might be able to install a volume control on the deck itself (it it doesn't already have one). |
While achieving your goal of increasing the output would not be too expensive, it will require some brain work and experimentation. https://www.electronics-tutorials.ws/blog/voltage-multiplier-circuit.html |