Taralabs cables


Hi, I wanted to start a new thread for all the owners of Taralabs cables, Enjoy, and cheers.
128x128audiolabyrinth
I've heard nothing like it," (Zero Evolution interconnect & Omega Evolution Speaker cable) – Michael Fremer / Stereophile 2014 Recommended Componentsthe new, finally flexible Zero Evolution takes the sound to another level of liquidity, transparency, and limitless high-frequency extension.” – Michael Fremer / Stereophile Magazine 2014
Post removed 
Making Sense of … Standard and SP version Speaker Cables

At TARA Labs, the major design goal for speaker cables is to reduce the inductance in the cable. However, there are some high-end amplifiers that need to 'see' some level of inductance (L) in the speaker cable. When the low damping factor of certain amplifiers is connected with (ultra-low inductance) TARA Labs speaker cables, the output of some high-end loudspeakers becomes audibly variable at different frequencies.
Extreme Audio Systems and Extreme Performance Cables with Low Inductance specifically for speakers that require additional inductance in a speaker cable.

The phenomenon is readily apparent, heard as bass that is soft and low in amplitude, sometimes together with high frequencies that are too smooth or rolled-off. Basically, the resistance in the loudspeaker cable should be ultra-low, and the inductance (L) in the cable needs to be low but sufficient to provide a load to certain amplifiers. There is no ideal value for (L). It varies from system to system, just as impedance varies with frequency in most loudspeakers.

The loudspeaker cables carry much higher signal voltage and current into a non-linear impedance (the loudspeaker) ... so the reactive load of the loudspeaker can be difficult for some amplifiers to drive... and the all-important damping factor of the amplifier changes from amplifier to amplifier.

One of the great attributes of TARA labs high-end Speaker Cables is their ultra-low inductance. These Speaker Cables are the 'state-of-the-art' in both technology and design from TARA Labs. Its performance level is absolutely spectacular when matched with the majority of high-end audio components available today. And as with an ever increasing introduction of new components into the marketplace, we have found over and over again that not every cable or component has the perfect symbiotic relationship with each other. In these particular instances, there are some amplifiers that need to 'see' some level of inductance (L) in the speaker cable. For certain loudspeakers and amplifiers, these cables are designed to work exceptionally well with amplifiers with a low damping factor or loudspeakers with a very reactive load in the lower frequencies. In addition to inductance, TARA Labs SP model speaker cables are also designed for audio systems that are inherently bright or strident in their sound. They offer a controlled bandwidth by being more forgiving with glare or stridency.


CONDUCTOR TECHNOLOGY AND DESIGN

TARA Labs high-end audio cables are world renowned for technology and design.

Beginning with our proprietary SAOF-8N conductors - Super-annealed, oxygen-free, mono-crystal, frequency-tuned, 99.999999% pure copper conductor.

*Below is a breakdown of the process.

99.999999% Copper conductor: This translates to an audio cable conductor that is 99.999999% pure, for incredible musicality, detail & performance.

Super Annealing: is a process that softens and increases the conductivity of the copper conductor. TARA Labs take this process several steps further by annealing the copper conductor beyond the ASTM standard. That’s the: American Society of Testing and Materials. After annealing, the RSC conductors are polished in-line, and will become finished SA-OF8N® Rectangular Solid Core conductors ready for insulation using advanced polymers, air or liquid-film technology.

Oxygen-free: Removal of all oxygen molecules for better signal transfer and less distortion.

Mono-Crystal: TARA Labs uses a proprietary process to create a single mono-crystal conductor that translates into one long continuous crystal. This virtually eliminates all distortion caused by the junctions between crystals in copper conductors. Those junctions acting like miniature diodes, will alter the flow of high-frequency AC, causing the audible distortion. Mono crystal eliminates this effect.

Frequency Tuned: This is accomplished once the copper is extruded into a rectangular shape with exact geometrical measurements. This creates a conductor that is superior in high-frequency extension and detail.

Rectangular Solid Core conductors (RSC): Starting with Oxygen Free Eight Nines Copper (99.999999%), the copper rods are extruded into long, unbroken, mono-crystal copper rectangular conductors. The unique rectangular shape is geometrically formed to having specific ‘frequency-tuned’ proportions. RSC offers a shape that has a unique advantage over round conductors. RSC has the necessary mass for solid bass, yet are thin enough for a coherent reproduction of mid-range and high frequencies. The RSC is not subject to the same high frequency losses that hamper traditional round conductors. To further understand the principle behind RSC technology, it is necessary to understand a phenomenon known as “skin effect” This principle states that in a round conductor, higher frequencies will tend to travel towards the outside, or “skin” of the conductor, while lower frequencies will travel closer to the center of the conductor. The larger the diameter of a round conductor, the worse the effect will be, resulting in a significant roll-off of high frequencies in large gauge conductors. Because of its rectangular cross section, an RSC conductor essentially has no center like a round conductor. Therefore it does not suffer the same high frequency losses. It is the only conductor that is able to combine high current-carrying capability with extreme frequency linearity across the musical spectrum.


The One CX

Extremely transparent, detailed, open and revealing; spacious soundstage with well defined and vivid images; fine resolution of detail and ambient information. The The One CX has 8+ gauge conductor runs; SA-OF8N® copper; each channel comprised of 70 RSC® Gen 2 conductors in Aero-PE® dielectric; positive/negative run for each channel; positive/negative runs are 35 conductors each, helixed around Teflon® air-tubes™. (Click on image to enlarge)

 

  • BSM (with 1/4” Spades or Bananas)
  • 8+ gauge conductor runs.
  • SA-OF8N® copper.
  • Each channel comprised of 70 RSC® Gen 2 conductors in Aero-PE® dielectric.
  • Positive/negative run for each channel
  • Positive/negative runs are 35 conductors each helixed around Teflon air tubes
  • Extremely transparent, detailed, open & revealing
  • Spacious soundstage with well-defined and vivid images
  • Fine resolution of detail & ambient images
  • Extremely neutral & open

The One CX speaker cables use SA-OF8N copper conductors. (Super-Annealed, Oxygen-Free, Mono-Crystal, Frequency-Tuned, 8-Nines-99.999999% copper conductors) All cables have: hand-polished conductors and are handmade per order in Ashland, Oregon, USA. The ISM The One - is lifetime guaranteed. The cables arrive in a Mylar static bag, enclosed in a custom embroidered velvet bag, inside a TARA Labs box.