WATT PUPPY 3/2 WHAT AMPLIFIER?TWEETER

I am using Audio Note Ankuro amplifiers (PSE-845 mono blocks) that give the speakers a real musical nature, detail, warmth, and good bass. On very large orchestral pieces the limitation of 75W dynamics constrained. I home auditioned a pair of Atmas-sphere MA2 MKII.2 and these amps made my W3/P2 sing even more beautifully than before' fantastic dynamics, and even much better bass. That's 200W of OTL amp having few deficiencies. I've always preferred tubes rather than SS so I just don't care for W3/P2 with SS. Just not musical enough for me. This may say something about the speakers, amps or me. Since my W3/P2 are highly modified and I have a very good room for them. I'm going to upgrade my amplifiers after auditioning higher powered tube units.

To be honest, I could never get the bass tight with my Puppy 2s in my room. This may sound like Wilson heresy, but the best I got was using an external active crossover to bypass the internal crossover and biamped them. The sound improved even further when I used a digital EQ to smooth out the room response.

i have owned 3/2s, 5.1s, and now 6s. 2 things i have learned about watt/puppy bass. first, get all the power you can; i now have levinson #33 monoblocks and the additional control transformed the 6s. second, the woofers on the puppy's are greatly affected with speaker height. don't be afraid to fully extend your puppy paws to reduce room interaction. i can't remember the spike arrangement on the 3/2s but experiment with height and your bass will tighten up. as far as the tweeters, the 5.1 tweeter was better for me than the 3. good luck.

krell+mit

I use the watt puppy 3/2 with a krell fpb600
I upgraded the spikes to puppy paws.
the puppy tail i use is a transparent reference xl MM version.
Not that expensive at all ( no network)
I'm very happy with the sound.
btw i use the original tweeters