2. analog
  3. 129079-4724

Capacitance loading and fixed coil cartridges

Hi all.  I am looking at all the various models of Soundsmith cartridges and seeing three different output levels, 2.12 mV, 1.1 mV and 0.4mV). I happen to have a low output version. I was wondering if anyone knew if the ideal amount of capacitance applied by the phono preamp (and phono cable) was dependent on the cartridge output?  In other words, higher output MM and MI cartridges require more capacitance and lower output cartridges less capacitance. Is this on track? How does inductance play a role here?  

-Karl
128x128karl_desch
karl_desch's avatar
karl_desch OP
422 posts
 
Thanks Paul but what about MI cartridges with low output?
karl_desch's avatar
karl_desch OP
422 posts
 
Also, these are great links.
donvito101
278 posts
 
Capacitance does not effect the output on a MI or MM cartridge, including low or high output!
karl_desch's avatar
karl_desch OP
422 posts
 
Thanks doncito101. I'm not asking if capacitance on the phono pre/cable affects output of the cartridge, but rather, if low output MI cartridges, like the SoundSmith Zephyr Star, benefit from capacitance loading like some higher output MI/MM cartridges? This is assuming the cartridge is getting the right amount of resistive loading and is on a compatible tonearm. 
The dealer recommended capacitance loading around 400pf total FWIW.
donvito101
278 posts
 
I doubt that there is any difference whether it is a low or high output. Do you have any way to change it? If you do give it a try and see if you can hear it.  
More to discover