Any thoughts on a solid hickory platform under my tt


I have access to some beautiful 2" thick hickory butcher block instead of maple any thoughts on vibration control vs maple 
128x128oleschool
astro58go
24 posts
07-02-2016 2:58pm
OK?? How does this response plus your response in the thread addressed above make sense to all of us "earthlings"?

I dunno. What did I say in that thread? 

Post removed 
I will get a weight on my sub and i am gonna try your setup on my classic ..springs should be ok on my carpet i have berber with thick pad ? Thanks for all the input 
oleschool OP
116 posts
07-02-2016 4:19pm
I will get a weight on my sub and i am gonna try your setup on my classic ..

Just in case it’s not obvious the bottom of the TT would need to be perfectly flat and uniform to be able to accommodate the springs. Otherwise, as the other dude observed, you will need a board between the TT and the springs. One more thing, it’s probably best to remove the feet from the turntable if you use a board between the TT and the springs since it’s not a good idea to have two springy systems in series. If it were me I'd interface the TT to the board with cones, say DH Cones.

cheers

Post removed