Taralabs cables

Tara labs Zero Evolution Phono, this is the only zero Evolution cable that has the generation 3 conductors that is only in the Grandmaster Evolution analog interconnect, ,,




The Zero Evolution Phono-Cable is the epitome of high-end reference quality phono cables. The design and technology used in creating this exceptional cable, is a far cry above any other phono cables that are currently available in today’s marketplace. Extremely low Capacitance as well as exceptional high-frequency extension The Zero Evolution Phono-Cable works very well with all cartridges regardless of voltage.
The Zero Evolution also incorporates a “star-ground” system (SGS) with a variety of optional male/female mini-banana connections. This system is unrivalled in that it provides the option of floating or connecting different sections of The Zero GX Phono-Cable shielding system. There are subtle differences to be heard, some of which are caused by slight variations in the shield and grounding arrangements of the cartridge and the tonearm, and the turntable and the phono-preamp. As we all know, the shield/ground formats in the Phono interface are sometimes different enough to create a hum or buzz problem. Using The Zero Evolution Phono Cables’ superb proprietary shielding system, we are able to provide a method of optimizing the shield and ground system for the lowest possible noise floor in this critical component interface. As we all know, the shield/ground formats in the Phono interface are sometimes different enough to create a “hum or buzz” problem. With The Zero Evolution Phono Cables’ proprietary shielding system (SGS), we are able to provide a method of optimizing the shield and ground system for the lowest possible noise floor in this critical component interface.
“Master” Gen3 Conductor is: 99.999999% Oxygen-free, mono-crystal, rectangular solid core, hand-polished, frequency-tuned copper conductor.Available termination: RCA, XLR, 5 pin DINHandcrafted in USA and lifetime guaranteedExcellent high-frequency extension & exceptional detailTight bass & full midrangeExtremely revealingImpressive holographic soundstageNeutral & naturalUnparalleled musicality.

Making Sense of….Gen 3 Conductors
TARA Labs, Inc. has just announced the introduction of its Generation 3 Rectangular Solid Core® conductor, to be used exclusively in its state-of-the-art interconnect cables.
TARA Labs claims that the Gen 3 conductor has an increased bandwidth or high-frequency extension, that makes it unrivalled in important test measurements and listening tests.
TARA Labs’ Matthew Bond said that the new Gen 3 conductor has the same current-carrying capability of a 28 gauge conductor but has the high frequency linearity of a 40 gauge conductor.
Matthew Bond explains why this is possible. “In a conductor with a rectangular profile, there is a huge reduction of ‘flux-linkage’ or ‘coupling’ of electromagnetic lines of force. These lines of force are created as the signal (music) passes through any conductor.” Bond said further, “In a round conductor there is a large center that tends to roll-off or attenuate much more of the high frequency information … this does not happen in a Rectangular Solid Core® conductor”.
According to Matthew Bond, the new Gen 3 Rectangular Solid Core® conductor is smaller than the current Gen 2 conductor used in most of TARA Labs’ audio cables. The Gen 2 conductor measures approximately 25 thousands of an inch wide and 12 thousands of an inch in height. Bond says that the Gen 3 conductor is about 66% of the size of the Gen 2 conductor, and that it is Super-Annealed™ to increase its conductivity.
Both the Gen 2 conductor and the smaller Gen 3 conductor are said to be Eight-Nines™ pure copper, which is 99.999999% pure. TARA Labs’ trademarks for this technology are 8N™ and SA-OF8N®. SA-OF8N means Super Annealed – Oxygen Free 8 Nines copper. According to Bond, the term ‘annealing’ refers to the method whereby a conductor can be made softer and more conductive.

The Cobalt™ AC




The Cobalt AC power cable has 10 gauge conductor runs; 60 Rectangular Solid Core copper conductors helixed in and around Teflon® air-tubes™.  Each neutral run is dual shielded with anti-Corrosion coated SA-OF8N® copper braid.
Wattgate standard IEC plug.Additional upgrade Oyaide Plug
 
REVIEWS:
  “I took the Cobalt AC out of the package and right away I could hear the change in my system. Richly textured, more detail and soundstage. I admit that though I have always believed the difference that interconnects and speakers cables make, but was unsure if a power cable could do anything. Boy was I wrong!” – A.K.                        “...with the addition of a single length of The Cobalt power cable. From that point, as additional cable was swapped in, he stopped roaming and just grew in bulk and substance, grounded to earth as a person subject to the laws of gravity should be... Put aside concerns about weight and body—the Cobalt power cord introduces so much mass and muscle, well beyond the current... Confoundingly, the Cobalt PC also adds control, so it's not only richer and weighty—it has better timing and resolution.” – Marshall Nack / Positive Feedback
 

Dealer brought one over did nothing actually made things worse!
YMMV 

That’s because you accessorized the power cord on on the radio shack Optimus receiver you had on hand for your musical listening pleasure, and to further prioritize you’re experience, you likely used your rack system Sanyo tower speaker’s with 20 gauge zip cord speaker cable’s, ymmv.