2. misc-audio
  3. 1448553395

Electric Interference + Line / Surge Conditioning

Strange thing...I have a gas stove with an electric igniter.

When I ignite one of the burners, the clicking of the igniter interferes with one of the outlets my front-end is plugged into. Click...Click...Click (my kitchen is NOT in the same room)

I have a PS Audio AV 3000 running on the outlet which my front-end is then running into.

I'm sort of surprised that the front end cuts-out/picks up the this interference.

Anyone experience something similar (albeit odd) and was able to solve with a new outlet or difference conditioner/surge suppressor?
mjmch2003
jea48
4,294 posts
 
Is the 120V receptacle the stove is plugged into properly earth grounded?

You can easily check it with one of these.
mjmch2003 OP
243 posts
 
Thank you. I'll check this out.

The really, really odd thing is that it's only one of the burners..not all 4 that causes thing.
rrsclyde
84 posts
 
I have a similar issue: every time the HVAC system comes on, my pre/pro loses lock on the digital signal it is receiving. Putting a surge protector in front of the pre/pro helps some but the problem still surfaces regularly...

I'm thinking I need an electrician or HVAC specialist to troubleshoot.
jea48
4,294 posts
 

11-28-15: Rrsclyde
I have a similar issue: every time the HVAC system comes on, my pre/pro loses lock on the digital signal it is receiving.
11-28-15: Rrsclyde

Are you using digital coax cable? If so try a different digital coax cable that is at least 1.5 meter long.

http://forum.audiogon.com/cgi-bin/fr.pl?htech&1444270980&&&/DAC-drops-out-when-Furnace-starts-or-sto
.
More to discover