Balanced vs standard power


Searching for an Isolation Transformer 10 or 15kva. I have the budget for Equitech but I'm sold only on the benefits of isolation and not "yet" on the benefits of balanced power unless one is recording live musicians. My rationale is that most if not all audio components are not designed with balanced power so they may be optimal performers with standard power and lesser performers with balanced power. Until someone does a side by side comparing isolated balanced to isolated standard power we may never know.

I have read the various threads regarding isolation transformers from Equitech 10wq, MGE Topaz etc, and the Euqitech stereophile review. For larger non-balanced options there is Ultra K 600 with K factor correction and triple shielding from the Controlled Power Company. They range from 5 to 25 kva.

I think supersizing Isolation transformers for audio is not well recognized yet because no one has done the necessary review/ comparisons to determine the performance curve of Isolation Transformer size to Audio Performance. Although Isoclean advocates the use of two of their Isolation Transformers for each piece of equipment. Maybe they're trying to tell us something or just sell more transformers. 10 KVA is "plenty" for my system according to Martin at Equitech, but "plenty" is not quantified enough to convince me, so I 'm leaning toward the 15kva on the Ultra K 600 from Controlled Power about $4000 vs Equitech 15 kVA at upwards of $14000.
natan6355
Sorry, misled again.

UL101 and IEC 60335/60990 are more consistent than I was told. IEC is specific about class and such but generally leakage limited from 0.5mA. Difference is that IEC specifies true RMS reading.

Still, that's per appliance.
While I see the benefits of having one large primary isolation transformer for separating your main audio line from the rest of the house and regional power. but, you still have noise generated and kicked back into the line by individual audio components, especially those with switching power supplies.

So, you may want to isolate individual components from each other. Obviously, amps need much larger transformers than sources.

I bought six surplus commercial/industrial Topaz 2.4kVA Ultra-Isolator Transformers. It was actually a 240V, 3-phase, setup that I simply separated into individual units and re-wired for balanced power operation.

Anyway, it is amazing how much line noise you don't notice until it is gone.
Post removed