What should I look for in a Processor??

Not being a super video buff, I am strongly of the opinion that one is better running the video signal, either from the cable converter or DVD player directly to the TV (assumably via an HDMI output/input) and just taking the audio signal to the pre/pro.

Additionally, I am in agreement for the most part that buying used processors is the way to go. A unit that is only 1-2 years old can be purchased for a fraction of the new price (ie. about 25%) and I have found that the processing offered in these sub 5 year old processors is perfectly fine. But again, I am not a true HT/video buff but much more concerned with 2-channel performance.

For the record, I have heard both inexpensive used (ie. a couple year old processors) and brand new expensive processors (in my system, McIntosh MX 132 at the time and a new Krell HTS 7.1 2007 model) and for HT don't feel that there is a noteworthy improvement in buying the latest and greatest. This may not be the case in the $10,000 range processors, but has been my experience. I found that I received 95% of the pleasure from my old Acurus ACT w/ ABM as I did with either the McIntosh or Krell for HT (not necessarily 2-channel) and these can be purchased for under $350 used!

Ginas makes a good point, especially if you care about 2-channel performance. Get a pre/pro at a budget price such as he has mentioned, and later spring for a decent 2-channel preamp with HT passthrough for 2-channel listening as most of the pre/pros don't do that well in 2-channel. I had the B&K 507 S2 and also the Acurus Act III with ABM. The Acurus is somewhat prone to ground loop hum issues so be prepared if you go that route. Once you take care of the hum once, it is taken care of, but still takes a good day to properly correct it.