Tweak worth 100X It's price - Vibrapods


While I WAS not a big beleiver in the "tweaks" of audio to a any appreciable extent, I must rave about the performance recieved form these littel rubber pods. I purchase a few a couple months ago to place under my electronics and I was extremely happy with the result from the pods in combination with soem MDF particle board placed under the equipment pods combination. Rather than go into extreme use of adjectives regarding the improvement that was expereinced, just let me say that EVERYTHING opend up and became better. I thought my system sounded good but this little, cheap tweak was eye (ear?) opening.

I was extrememly happy with the imrovement to my electronics and then I thought - Why not the speakers also? I bought and installed pods for each speaker and
installed them. This was "as big" if not a bigger improvememnt to overall sound. I was experiencing some bass control problems around the real low end. These problems were now gone along with all the other distortion that I was experiencing and really not even knowing it or knowing it and blaming it on "room colorations".

You have just got to try these things. At $6.00 a pop you can't go wrong. Plus you can get a discount for quantity purchases usually. You will need a minimum of 4 per compopnent. $24.00 bucks that will make your system sound like you just put $2,400.00 into it.

I am a personal user and this is not an ad but I got my pods, along with a plethora of help from CJAudio/Video through this (AudiogoN) site. (www.cjsaudvid.com) Craig will take good care of you.

Feel free to email me ([email protected]) if you have any questions / comments.

I can also send you a picture of the stands i built for the speakers to incorporate the pods / and the Legacy supplied spikes if interested.

Relevant System Info:

Processor: Aragon Soundstage
Amp: Aragon 8008BB
Speakers: Legacy Classics.
CD: Denon 5 disc carousel.
Interconnects: HT ProSilway II (Pre - Amp)
Monster Coax Digital (II) (CD- Pre)
mackpat

Showing 1 response by bozo

The BDR #3&4 cones with the puck. You can couple them together with all-thread nipple. Vast improvement over just the cone. I usually have three under a component with two facing the same direction. Plus they help stabilize the equipment with a larger contact area. If you can afford it a BDR board with the cones on both sides is great. I had a local carpenter/kitchen specialist sandwich 3MDF boards together and this works well under a TT. I also agree that mass loading a cd and preamp helps for vibration control. However if you overload to much the unit, it can dull the overall sound. I use multiple zip lock bags with sand to evaluate which is best. If you can find the VPI wood blocks they also make good mass loaders for amps. If not use a brick/lead shot(in a bag or tupperware)