2. analog
  3. 1266176638

Turntable platforms Halcyonics/MinusK/vibraplane

I have a turntable with an external motor (TW Raven AC) and wondered what the right way to use one of these "lab quality" platforms is... do you keep the motor pod on the same platform with the table. That would seem right to me, as you seek to isolate the entire system, not just one element of the system.

It's a bit of an academic questions, but arises b/c the only platform that suits my living area (aesthetics) is the Halcyonics "Silencer" which is 19wx17"d, so not nearly big enough to hold the entire table, as my motor is in the back and really needs about 22" depth though width is fine.

As an alternative, I could create a piece of slate that runs under the table ( from front to back) and exits out the back with an overhang on which the motor can sit on (like a plank off a ship, but meant to be stable). The slate would be 19" wide to fit the profile, and 22" deep. So table and motor sit on slate (with motor on overhang bit) and slate sits on platform. Does that reduce effectiveness of the system?

Thanks in advance.
hatari

Showing 1 response by sdlevene

sdlevene
13 posts
 
Hatari,

You probably do not want to mount the motor on a separate platform because cogging of the motor will excite resonances of the damped suspension system. This will occur even with a Halcyonics or Minus-k platform. I have a a VPI TNT turntable supported on a Minus-k BM-8 isolator. The turntable's outboard motor rests on the BM-8 platform supported by a granite tile on top of three sorbothane hemispheres. There are many possible configurations of sorbothane components that can used for isolation; consult the downloadable program on the sorbothane website, which calculates the resonant frequency of a sorbothane part as a function of supported mass, shape, size, elastic modulus (durometer rating), etc. You can optimize your setup by reducing the resonant frequency of your motor support as far below the lowest frequency of the motor as possible.

With this setup wow and flutter measure in the 0.02 to 0.03% range. Speed stability (SDS stabilized) is in the 0.1% range.
More to discover