Review: Theta Compli Blu vs Oppo BDP-83 SE


I have both the Oppo BDP-83 SE and a brand new Theta Compli blu. I have compared the two players and found the Theta to beat the Oppo in most areas.

Finally been able to do a test between the Oppo 83 SE with HD-SDI and the Theta Compli Blu. I have not used any measurements in the test, so it is not an attemt to be scientific in any ways, just my opinions and my findings using my own eyes and ears. I am not considering the differences in price, this small test is just about performance.

Test with both units performed in my no. 1 system and with exact same cables. All video cables are Nordost silverscreen. Audio going through a Cary Cinema 11a to amps. Video going through a Crystalio II VPS-3800 processor and to a Sony VW100 projector which has a new bulb. The units are set to run Source Direct, dvd is sent as 480i, and BD as 1080i or 1080p. Both units are also running the same firmware from Oppo, from Dec 24 last year.

So how does the Compli Blu, brand new out of the box, perform against the Oppo 83 SE which already has run about 100-150 hrs? Very well I have to say.

1) Test #1: Blu-ray movie
Because of a bug with HD-SDI in the current Oppo firmware I am not able to watch Blu-ray through HD-SDI, only HDMI. So I compared apples to apples, HDMI out from the Oppo 83 SE and HDMI out from the Compli Blu.

-Results for video:
The Compli Blu has lower noise and more vivid and lifelike colors. It is not a big difference, but noticeable. I especially like the colors the Compli Blu. It looks like it has more density. It is also sharper, and very very close to HD-SDI from the Oppo as I can remember it. Although I belive HD-SDI out from the Oppo will be a bit sharper, I think I would prefer the Compli Blu because of the nice colors.

-Results for audio:
Running digital audio out, there were big differences. The Compli Blu is far ahead.

Preferred order for audio (with Blu-ray)
1. Compli Blu digital to the Cinema 11a
2. Oppo SE digital to the Cinema 11a
3. Oppo SE analog to the Cinema 11a
4. Compli Blu analog to the Cinema 11a (but this is maybe because the unit is brand new and not broken-in)

=>Compli Blu won for both audio and video.

2) Test #2: DVD movie
Now compared both with HDMI and SDI out from the Oppo 83 SE and HDMI out from the Compli Blu.

-Results for video:
HDMI out from the Oppo loses. Then it is a very close race between SDI out from the Oppo and HDMI on the Compli. Same as with Blu-Ray I still prefer the colors the Compli produces, but now I can see that the Oppo with SDI really has an advantage when it comes to sharpness. SDI really shines here, so I think I will say that the overall picture quality from the Oppo with SDI is the best. But it amazes me that the Compli Blu without SDI is so close. Congrats to Theta!

-Results for audio:
Sames as with Blu-ray. Running digital audio out, there were big differences. The Compli Blu is far ahead.

Preferred order for audio (with DVD)
1. Compli Blu digital to the Cinema 11a
2. Oppo SE digital to the Cinema 11a
3. Oppo SE analog to the Cinema 11a
4. Compli Blu analog to the Cinema 11a (but this is maybe because the unit is brand new and not broken-in)

=>Compli Blu won for audio, and the Oppo with a small margin on video, but only when using the SDI output.

3) Test #3: SACD
I had the same results with 2ch SACDs and multich SACDs so I will not comment on each.

Now compared both with digital out and analog out for both units. Digital sent as PCM over HDMI up to 96 kHz. Still same cables.

-Results for analog output:
The Oppo 83 SE was clearly the winner here. Much more air around voices and instruments, greater depth and dynamics. The Compli Blu sounded less resolved and not as musical, but don´t misunderstand. The Compli Blu still sounds very good throgh the analog outputs. But also, I believe the Compli is built upon the standard Oppo and not the SE version so it was not surprising that I got these results. It should also be considered that the Compli Blu is brand new, so I guess it will improve quite a lot after some burn-in.

-Results for digital output:
Digital out from the Compli is a little bit better than from the Oppo. I don´t know why, but of some reason I think I could here bigger differences with movies where the Compli Blu was much better.

Going digital from my Compli Blu through the Cinema 11a also is a little bit better than analog from the Oppo SE.

=>Compli Blu won for audio when running digital out, but that is just because the DACs in the Cary Cinema 11a is up to the task. With a lesser Surround processor I guess running analog out from the Oppo SE would be hard to beat.

Preferred order (with SACD)
1. Compli Blu digital to the Cinema 11a
2. Oppo SE analog to the Cinema 11a
3. Oppo SE digital to the Cinema 11a
4. Compli Blu analog to the Cinema 11a (but this is maybe because the unit is brand new and not broken-in)

2 & 3 are hard to separate, sound very like on most recordings, also 1 & 2 are pretty close.

4) Final "conclusion":
Compli Blu is the winner if cost is not an issue. Or if you have a high end Audio/HT system. The Oppo 83 SE is still a very good choice and gives better value for the money.
cappuccino
I have been saving to get a new oppo this month, and i have read many good reviews about the oppo 83 SE.
The Compli Blu seems to be a great player, but the price is way expensive.
For what its worth, the MSRP price of the Compli Blu is half the MSRP of the Compli. I'd buy the Oppo 83 in a New York minute if I could find someone that could replace the coaxial out with an AES/XLR connection. I've asked a few of the modification firms if that's possible, but they've all said there's not enough room to do that. I wonder if that's why Theta didn't offer an AES/XLR out.
So what is Theta doing different. Cause if you look up the Manual for the Theta Blu ray it's the Oppo manual. So what that says to me is Oppo built it and Theta slapped there name on it and raised the price 3 x as much. Now I like Theta and I am an owner of Theta equipment. But this seems very suspicious.
It could be the Lexicon issue all over again unless Theta has come out and said their player is based on an Oppo with modifications. Check out this thread on AVGuide.com: http://www.avguide.com/blog/first-listen-lexicon-bd-30-universal-blu-ray-player
You can consider the Compli Blu as an Oppo on stereoids.
Here is a list of the enhancements Theta has done over the Oppo:

1.Heavy 16 gauge steel chassis for rigidity.
2.Positions of transport mechanism and display have been swapped. Lowering the mechanism allows for elimination an intermediary mounting bracket and long standoffs, resulting in greater rigidity.
3.Completely rigid mounted mechanism replaces the original spring mounted system.
4.Special 3M adhesive damping material used on drawer assembly, further reducing vibration energy.
5.RS-232 control is included as a standard.
6.Custom designed front panel PCB.
7.Custom designed analog power supply, which includes the following:
A. An 80 Watt ultra-quiet toroidal transformer.
B. Additional, independent 10 Watt transformer for Standby circuit.
C. A total of 7 Amps of power available to supply the unit.
D. Four independently rectified and regulated power supplies.
E. Over 40,000 uF filter capacitance, in small, low ESR multiples.
F. 2 oz. gold plated copper used throughout.
8.Proprietary Theta Digital customized software for superior performance, and that can be easily updated through USB port on the rear panel, or via Ethernet connection to Theta Digital's website.
9.Standard thick, brushed aluminum alloy cover provides better sonics and aesthetics as it reduces vibration energy further.
10.1/2" thick Tower and Faceplate matches other Theta Digital products.