2. amps-preamps
  3. 1330029503

Pass Labs heatsinks temperature

Hi all

I have Pass Labs xa60.5 monoblocks and they are always warm to the touch at the heatsinks and not as hot as other class A amps I'm familiar with. A friend from the US that has the same model visited my place and told me his amps ran very much hotter than mine. I got concerned and looked at the manual where temperature was estimated at 55 degrees Celsius. I estimate mine at around 40 Degrees. I'm concerned my amps are not biased to pure class A as they should be. I contacted Pass and while they repeated that heat should be around 55 deg. they had no idea if my concerns are valid and they sounded quite mysterious about it. Did anyone has a xa.5 series model ever measured its temperature or has an idea what can I measure without opening the amps (with a technician) that will prove that they are working only in pure class A ?
Thanks in advance
icorem

Showing 3 responses by hgeifman

hgeifman
2,110 posts
 
I suggest you call Pass Labs again and ask them how you can check to see if the amps are biased to pure class A as they should be. I am also not a DIY person so I suggest you take the amps to a local technician and request the amps bias be checked. Pass Labs should be able to explain how to do this (I hope).

You have to ask Pass Labs if the amps are not bias correctly, can the local technician set them correctly or do they need to be returned to the factory.

Do you have a local Pass Labs retailer who can help. A local Pass Labs retailer might be the best option.
hgeifman
2,110 posts
 
Please see the web site below:

http://www.il-audio.com/

This retailer carries Pass Labs. Can they help you?
hgeifman
2,110 posts
 
Icorem: As I noted above, http://www.il-audio.com/ is a Pass Lab retailer located in Israel. Can you take the unit to this retailer?
More to discover