- I had swaped places with the stereo and the bed. To get a left and right symmetry.
- I had swaped places with the stereo and the bed. To get a left and right symmetry.
- The method you can use: bass is the most problematic one. And bass is more of a pressure thing. So you have measured your room. You know that you have a peak at for example 73 hz. Take REW signal generator and generate/play back trough your system 73Hz. Take a sound pressure meter (dB meter) and put it everywhere (corners, along walls and so on) and note down what the pressure is.
- Take your isolation put it that in those brown/gray sacks that you can breath trough that Santa Claus use. (That goes nice with your bricks, gets a industrial look ;) or as Xmas decoration.
- Put the sacks at the positions that you noted had the highest pressure.
- You can thank me later :)
I bought some Owens Corning 703. Now what?
I'm investigating the acoustics of my room. I have been doing REW scans and analyzing them with the help of a member here. I've played with sub and speaker positioning and settings to see how this affects measurement and what it sounds like. I've reached out to GIK Acoustics to get their advice.
But, because I wanted to just try some experiments before (possibly) spending a lot with GIK and/or other companies, I bought 6 OC 703 panels (2" x 24" x 48") to try, temporarily around my room, singly or in combination. I might even make my own panels if that seems worthwhile.
My question is: What are some useful experiments to do with the panels and where in the measurements might I see some changes?
Again, this is not to replace getting expert help; this is a way for me to start to learn by interactive experience how my room is affecting the sound. So, good things to try?
But, because I wanted to just try some experiments before (possibly) spending a lot with GIK and/or other companies, I bought 6 OC 703 panels (2" x 24" x 48") to try, temporarily around my room, singly or in combination. I might even make my own panels if that seems worthwhile.
My question is: What are some useful experiments to do with the panels and where in the measurements might I see some changes?
Again, this is not to replace getting expert help; this is a way for me to start to learn by interactive experience how my room is affecting the sound. So, good things to try?