Perhaps a solvent? The first one to come to mind is nail polish remover, but a good cabinet maker would know better than I would. How about applying just a little overnight and see if that loosens it up. The punchline is to use little enough to not let gravity carry it to the glues in the driver.
How can i ......
get a woofer out of the cabinet ?
I have a good sized subwoofer with a 15" driver that i'd like to do some internal mods / repairs to. In order to do this, i have to take the woofer out as it is the only reasonable sized access point to the internals. The problem is, i can't get the rassafrassin' driver out of the box. I have tried everything that i know to do this without going "bonsai" on it. I almost think that the driver was not only screwed in but also glued in place.
The woofer is a JBL 2235, so it is a sturdily built driver. All of the screws have been removed that hold the driver in place and the rear hatch for the binding posts have been removed. Having done that, i can push directly on the rear of the driver and NO luck what so ever. I have even tried pushing on the driver from the rear while my brother tried to pry the driver out from the front using a large screwdriver as a wedge. The only result of that effort was a small amount of damage to the baffle from the screwdriver digging into the wood. Luckily, that is all hidden under grille cloth.
Short of resting a 2 x 4 on the back of the driver and whacking it with a hammer a few times, has anybody got any suggestions ? This one has been a real ....... to say the least and i want to get it out of the house. It is a gift for my Dad, so it can take up space over there once i can figure this out and get it done. ANY help or suggestions appreciated ( short of a stick of dynamite ) : ) Sean
>
I have a good sized subwoofer with a 15" driver that i'd like to do some internal mods / repairs to. In order to do this, i have to take the woofer out as it is the only reasonable sized access point to the internals. The problem is, i can't get the rassafrassin' driver out of the box. I have tried everything that i know to do this without going "bonsai" on it. I almost think that the driver was not only screwed in but also glued in place.
The woofer is a JBL 2235, so it is a sturdily built driver. All of the screws have been removed that hold the driver in place and the rear hatch for the binding posts have been removed. Having done that, i can push directly on the rear of the driver and NO luck what so ever. I have even tried pushing on the driver from the rear while my brother tried to pry the driver out from the front using a large screwdriver as a wedge. The only result of that effort was a small amount of damage to the baffle from the screwdriver digging into the wood. Luckily, that is all hidden under grille cloth.
Short of resting a 2 x 4 on the back of the driver and whacking it with a hammer a few times, has anybody got any suggestions ? This one has been a real ....... to say the least and i want to get it out of the house. It is a gift for my Dad, so it can take up space over there once i can figure this out and get it done. ANY help or suggestions appreciated ( short of a stick of dynamite ) : ) Sean
>