Entreq Silver Tellus grounding/earthing system


Hi A'goners, I'd like to tell you all a little about this component which has taken noise elimination in my system to a whole new level.
I run a Trans Fi Salvation/Terminator tt/arm, ESCCo modded Zu 103 cart into a Tom Evans Audio Design Groove Plus SRX phono, Emm Labs CDSA SE, Hovland HP200/Radia pre/pow, and Zu Definitions Mk4 spkrs. This set up is (now) effortlessly dynamic and transparent.
I live in a semi industrial area with broadband on in every apartment, internet booster stations and light engineering nearby.
It became apparent some years ago that apart from the hours of midnight to 5am, I could not rely on a good sound, and research led to conclusion that mains borne noise was likely the culprit.
This led to my first partial success, the installation of the Burmester 948 mains conditioner/filter 7 years ago. This resulted in an immediate reduction in noise and increase in transparency/delicacy ie a major improvement, even in daylight hours. BUT it became apparent over time that dynamics were seriously pinched, and the conclusion I've correctly drawn is that peak current demand was restricted by the unit compromising the power amp output.
This led to my next upgrade, and now real progress: an 8kVA pro studio Westwick 8K balanced power transformer. Now I got all the previous improvements with no current restrictions to the power amp - transparency AND NOW dynamics in spades.
But as with all things audio, the awareness of the Entreq grounding/earthing system piqued my interest further in eliminating mains issues. Entreq are a Swedish audio engineering company with a couple of decades experience, and provide a variety of mains and interconnect products.
The Entreq Silver Tellus is a wooden box, the size and weight of a small power amp. It contains inert minerals and a grounding plate. It's a passive device ie NOT powered from the mains, and sits adjacent to the system. In my system, one Apollo Eartha interconnect runs from one of 4 terminals on the back of the Tellus, to an unused input of my preamp. it is possible to connect another 3 components to a single Tellus.
In effect, it provides an ADDITIONAL earth/ground to the system, NOT replacing the existing protective earth. This then provides an uninterrupted drain for RF/EMI/other hash from the system to the Tellus.
I was expecting a minor improvement at most. What i wasn't expecting was a transformation of the system.
Firstly, soundstage deepens dramatically, so much so that the stage seems totally independent of the spkrs. Phenomenal reduction in noise really enhances the blackness between notes, and brings micro detail to the fore. This reduction in noise has the amazing side benefit of relegating vinyl surface noise way into the background. the overall effect is a fantastic incraese in dynamics and transparency, taking what balanced power brings to the party and sending it off the scale.
Vitally, the nature of the system sound hasn't changed, since the Silver Tellus enhances performance, doesn't change it; in many ways is the best system wide upgrade to optimise performance I could make.
My conclusion from the last 7 years is that noise is the major limiting factor in my system, and the installation of Westwick 8k balanced power ($7000) and Entreq Silver Tellus/ Apollo Eartha grounding/earthing ($3000)
spiritofmusic

Showing 3 responses by tboooe

Gbmcloed...i am very curious to hear your thoughts as I was thinking about getting one as well. I understand there is a money back guarantee so I may just pull the trigger anyway.
Thank you gbmcleod! I havent pulled the trigger yet on the Minimus. I also use Stillpoints in my system. I found that they only improved the sound when placed under my PS Audio P3 ac regenerator. The Stillpoints did nothing when placed under my Luxman CDP or Accustic Arts integrated. I guess thats a good thing, saving me money!

I look forward to hearing your thoughts!
Thank you again gbmcleod! It's great that you hear a major difference when used with the PS Audio unit. It seems our system is similar in the sense that we also use an integrated. What is the RCA to spade connector and why is it needed?

As for Stillpoints, I do want to try them again. When I first tried the Ultra SS and Minis in my system I did not have room treatments and speaker position optimized so perhaps that had an impact on what I didn't hear.