Dynavector XV1-S and step-up

Lewm, my technical understanding is cursory, but here are the details available:

Shindo MM input: Pnono MM（RCA Pin Jack ) Input Sensitivity/Impedance：3mV/47KΩ.

Dynavector: recommended load resistance of > 30 ohms; output voltage 0.3mV (at 1KHz, 5cm/sec.);

Do these details at all get us to difference in gain. Pardon my complete ignorance.

Cheers

Thanks guys - appreciate all this. Have to read the posts at least 2-3 times, but am starting to get it. Good education.

Thanks. Oddly enough, the MC input on my Shindo is:

Phono MC（RCA Pin Jack ) Input Sensitivity/Impedance：0.2mV/2 -100Ω.

Perhaps I should stop fiddling and just use the internal MC step up? I am curious to experiment with it though.

Cincy_bob: any thoughts on a worthwhile avenue to explore in terms of SUTs? Looks like the A23 Hommage, Kondo KSL (both very expensive), EAR MC4 (highly adjustable it seems, and more "reasonable").

Lewm: yes, original post talked about the MC a little, so thought I'd framed it properly - looking to optimize, not reinvent. Question is whether it's optimized for the Dynavector, hence the discussion and desire to see whether an SUT into the MM (this pre has both) might be interesting. Thanks for your input. I have a few paths to explore based on this post and some constructive private thoughts.

Raul, thanks (I think). Just for fun, what phono stages are at the higher level to allow me to improve my "poor" phono in the Masetto. I'm honestly dying to know, as I'm very impressed with this phono. Perhaps it's a typo but you say "IMHO too" - no one else on the forum has suggested similar... Let's say the bogey is $5k - what do you suggest?

Look forward to hearing your specific thoughts.

Regards

Lewm: thanks for the context. Just to clarify, I've been listening to my pre-amp for 2 years, so know it well. I just haven't explored SUTs (or external phonos, as the integrated phono is part of the attractiveness of the Shindo).

Will listen to a few SUTs and clearly form my own opinion. Having said that, I enjoy getting educated, and confused and appreciate the effort of all who post.

Cheers

If I may, let's move on from the Shindo discussions. For the record, I love my Shindo gear - it's something special. I appreciate the input thus far, but don't want to get off track.

Now, back to the question on SUTs and Dynavector XV1-S...

Right now, I am tempted to try one SUT in particular, but also think that perhaps I'll just leave it alone and buy a ton of new records..:)

Cheers

Lewm: thanks, yes saw it. Very interesting, seems like he liked a few better (A23 Hommage and the AN, I believe), but found it to be great with the Miyabi (which is .3mv, 2ohms). Dynavector is .35mv, 6ohms. Sounds pretty close to me.

Lewm: I have been listening to my internal phono for 2yrs... just FYI, b/c it seems some are thinking I just got it. I've been listening extensively for some time, and it sounds pretty damn good. Just trying to optimize/explore further. The key question is matching to the Dynavector which may have not been the focus of the designer of the phono stage in the Masseto.

My head is spinning, but I hopefully have a few options to try and listen to at home in the near future, will keep you posted.

Lewm: Again, I'm actually very happy with the Shindo phono (its right in the middle of the range). I only posted to see if an SUT would make me happier. Don't mean to repeat myself but I'm just exploring. I may try SUTs and phonos and it all ends up with "the Masseto is better". So, I decided to explore a bit and posted. Didn't mean to create an uproar, and the fact that I asked the question doesn't mean the preamp isnt working or isn't good.

Axelwahl: you got it, hoping to try the A23 Hommage and others